Publicidad
Idiomas disponibles
Idiomas disponibles
2in1 Rechargeable Table Lamp Lamp Use instructions
This appliance must not be used by persons (including children)
with limited physical, sensory or mental capabilities, by persons
that lack experience and knowledge of the appliance, unless they
are closely watched or well instructed by a person responsible for
their safety regarding the use of the appliance.
Children must not play with the appliance.
When the appliance must be disposed of, it is recommended to
make it inoperative.
It is also recommended to render harmless those
parts of the appliance likely to constitute a danger.
This appliance must not be used by children. Keep
the appliance and its cable away from children.
Usage Warnings
The battery fully charges in about 5 hours, while the autonomy is
approximately 6 hours at maximum brightness. At minimum bright-
ness, the battery lasts around 15 hours.
Do not turn on the lamp while the product is charging.
The product is equipped with overload protection to ensure longer
battery life. Place the lamp away from rain. Store the lamp in a dry
and secure place. The IPX4 protection level protects the product
from water splashes but not from weather elements.
Warning: the bottle adapter does not function as a cap for
storing liquids in the bottle, as it is not suitable for food
contact.
Product Description Fig.A
1. ON/OFF touch switch and intensity adjustment
2. Charging port (USB Type C)
3. USB charging cable
4. Lampshade
5. Bracket
6. Base
7. Bottle adapter (for bottles with a diameter of up to 33 mm)
8. Curved connector
9. Lampshade connector
10. Diffusion lens
11. Charging status LED
Battery Charging
Insert the Type C plug of the charging cable into the charging port located under the lampshade. Connect
the USB cable to a USB charging source. Through the diffusion lens, you will see the charging status LED,
illuminated in red, indicating that the product is charging.
9
EN
Publicidad
