PARTS
1.
Sponge white
2.
Sponge yellow
3.
Scouring pad green
4.
Scouring pad blue
5.
Velcro holder
6.
Pointed brush
7.
Flat brush
8.
Drive
9.
On/off button
10. Indicator light
11.
Charging port
12. Charging cable USB-C
11
BEFORE THE FIRST USE
Charge the battery before first use. See use > charging.
USE
! Make sure the silicon charging port tab is closed before using the device. The device may be damaged
if water enters.
1.
Choose the attachment you want to use depending on the job to be done:
·
Flat brush: perfect for floor and wall tiles
·
Pointed brush: for hard-to-reach places such as corners of tiles, taps, rims, etc.
·
Scouring pad (green and blue): pots, pans, oven, stove, etc.
·
Sponge (white and yellow): shoes, paint, glass, mirrors, cutlery, etc.
2.
Place the attachment on the drive and press it firmly until you hear a click. When using the sponges,
place the sponge on the Velcro holder first and then place the holder on the drive.
3.
Press the power button to operate the device, change speed or turn it off (medium-fast-off).
4.
Clean the surface with some water and detergent. There is no need to exert force on the device, the
brush will do the work for you.
5.
Switch the device off using the on/off button before removing an attachment. Remove the drive
attachment by pulling it away from the device; you need less force with a downward movement.
24
DO1130SB
3
12
1
2
4
6
9
7
10
5
8