H.Koenig KM68 Manual De Usuario página 8

Insertion height: 2
Heating: electric oven, top and bottom heat 175-200° Celsius; gas oven: level 2-3
Baking time: 50-60 minutes
Depending on taste, this recipe can be changed, for example with 100g raisins or 100g nuts or 100g grated
chocolate. In fact, the possibilities are endless.
Linseed Bread Rolls, Level 1-2
Ingredients:
500-550g wheat fl our, 50g linseed, 3/8 litre water, 1 cube of yeast (40g), 100g low-fat curds, well drained, 1 tsp
salt. For coating: 2 tbsp of water.
Preparation:
Soak the linseed in 1/8 litre of lukewarm water. Transfer the remaining lukewarm water (1/4 litre) into the mixing
bowl, crumble in the yeast, add the curds and mix with the kneading hook on level 2. The yeast must be completely
dissolved. Put the flour with the soaked linseed and the salt into the mixing bowl. Knead thoroughly on level 1, then
switch to level 2 and continue kneading for 3-5 minutes. Cover the mixture and allow to rise in a warm place for
45-60 minutes. Knead thoroughly once more, remove from the bowl and form sixteen rolls. Cover the baking tin
with wet baking paper. Place the rolls on this and allow to rise for 15 minutes. Coat with lukewarm water and bake.
Traditional Oven:
Insertion height: 2
Heating: electric oven: top and bottom heat 200-220°C (preheated for 5 minutes),gas oven level 2-3
Baking time: 30-40 minutes
Chocolate Cream, Level 5-6
Ingredients:
200ml sweet cream, 150g semi-bitter chocolate coating, 3 eggs, 50-60g sugar, 1 pinch of salt, 1 packet of vanilla
sugar, 1 tablespoon cognac or rum, chocolate flakes.
Preparation:
Beat the cream in the mixing bowl with the whisk until stiff. Remove from the bowl and place somewhere to cool.
Melt the chocolate coating in accordance with the instructions on the packet or in the microwave at 600W for 3
minutes. In the meantime, beat the eggs, sugar, vanilla sugar, cognac or rum and salt in the mixing bowl with the
whisk on level 3 to form a foam. Add the melted chocolate and stir in evenly on level 5-6. Leave a little of the cream
for decoration. Add the remaining cream to the creamy mixture and stir in briefl y using the pulse function.
Decorate the chocolate cream and serve well cooled.
Meat Mincer
Initial Operation - General
1. Remove the cover (2a) from the helix drive and take out the screw (16).
2. Place the spiral housing (10) with the filler neck facing upwards into the spiral drive and turn the screw (16)
clockwise until it is closed.
3. Place the filling tray on the filler neck in such a way that the receptacle of the tray is positioned under the arm.
4. Push the spiral into the horizontal section of the spiral housing until the axle locks in place. Please see the
sections on "Operating the Mincer" and "Sausage Attachment".