Publicidad
Bluetooth Instructions:
Set the function switch to the MP3/BT position. After hearing the Bluetooth prompting
sound, open the Bluetooth settings on your mobile device to search the QFX J-230BT.
Select the option to connect. You will then hear a sound and see a light flash. Now you
can select music from your favorite music app.
USB/SD:
Insert a USB/SD Card in the corresponding port for music playback. The content will
begin playing automatically. Use the Forward and Rewind functions on the unit to
navigate through the .mp3 music.
Recording Function:
Radio Recording: Set the function switch to the RADIO position and select the desired
station. Insert a USB or SD Card into the device, then press the "REC/DEL" button to
start recording when the REC/MP3 PLAY light turns on. If you want to exit the recording,
press the "REC/DEL" button again or set the function switch to the USB position to exit
the recording.
J-230BT GUIDE
SETUP GUIDE
Step 1. Find the AC power cord to the J-230BT
located on the back panel of the unit.
Step 2. Find a power outlet (AC 120V/60Hz) and
connect the AC cord to the socket to supply the
unit with power.
Step 3. Move to the top of part of the panel and set
the switch to USB.
Step 4. Insert a USB flash drive in the USB port
located below the cassette compartment. The
J-230BT will automatically begin playing the .mp3
content.
Step 5. Use the Knob to adjust the Master Volume
to your taste.
Step 6. Press the Forward and Rewind keys to
move to the next track or prevous track.
GUIA DE PREPARACION
Paso 1. Busque el cable de alimentación de CA al
J-230BT ubicado en el panel posterior de la
unidad.
Paso 2. Busque una toma de corriente (CA 120
V/60 Hz) y conecte el cable de CA al enchufe para
suministrar energía a la unidad.
Paso 3. Vaya a la parte superior del panel y
configure el interruptor en USB.
Paso 4. Inserte una unidad flash USB en el puerto
USB ubicado debajo del compartimiento del
casete. El J-230BT comenzará a reproducir
automáticamente el contenido .mp3.
Paso 5. Use la perilla para ajustar el volumen
maestro a su gusto.
Paso 6. Pulse las teclas de avance y retroceso
para pasar a la pista siguiente o anterior.
Publicidad
