Publicidad
Idiomas disponibles
Idiomas disponibles
A
WARNING!
Read all safety warnings
and
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated
(cordless)
power tool.
WORK AREA SAFETY
== Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
== Do not operate power tools in explosive
atmospheres,
such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
== Keep children and bystanders
away while operating
a power tool. Distractions can cause you to lose
control.
ELECTRICAL
SAFETY
== Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk
of electric shock.
== Avoid body contact with earthed or grounded surfaces
such as pipes, radiators,
ranges
and refrigerators.
There is an increased risk of electric shock if your body
is earthed or grounded.
== Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
== Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging
the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
== When
operating
a power
tool
outdoors,
use an
extension
cord suitable for outdoor
use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
== if operating
a power
tool
in a damp
location
is
unavoidable,
use a ground
fault circuit
interrupter
(6FCl) protected
supply. Use of a GFCI reduces the risk
of electric shock.
[] Use battery
operated
tool
only with
specifically
designated
battery
pack. Use of any other batteries
may create a risk of fire.
[] For use with 19.2V nickel-cadmium
and 19.2V lithium-
ion battery
packs, see tool/appliance/battery
pack/
charger
correlation
supplement
988000-272.
PERSONAL
SAFETY
[] Stay alert, watch what you are doing and use
common
sense when operating
a power tool. Do
not use a power tool while you are tired or under the
influence of drugs, alcohol or medication.
A moment
of inattention while operating power tools may result in
serious personal injury.
[] Use personal protective
equipment.
Always wear
eye protection.
Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
[] Prevent unintentional
starting.
Ensure the switch
is in the off-position
before connecting
to power
source and/or battery
pack, picking up or carrying
the tool. Carrying power tools with your finger on the
switch or energising power tools that have the switch
on invites accidents.
[] Remove any adjusting
key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal
injury.
[] Do not overreach.
Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
[] Dress properly. Do not wear loose clothing
or
jeweller/.
Keep your hair, clothing
and gloves away
from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
[] If devices are provided for the connection
of dust
extraction
and collection
facilities,
ensure these are
connected
and properly
used. Use of dust collection
can reduce dust-related hazards.
[] Do not wear loose clothing
or jewelry. Contain long
hair. Loose clothes, jewelry, or long hair can be drawn
into air vents.
[] Do not use on a ladder or unstable support.
Stable
footing on a solid surface enables better control of the
power tool in unexpected situations.
POWER
TOOL USE AND CARE
[] Do not force the power tool. Use the correct
power
tool for your application.
The correct power tool will
do the job better and safer at the rate for which it was
designed.
[] Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
[] Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments,
changing
accessories,
or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
[] Store idle power tools out of the reach of children
and do not allow persons
unfamiliar
with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
[] Maintain power tools. Check for misalignment
or
binding of moving parts, breakage
of parts and any
other condition
that may affect the power tool's
operation.
If damaged,
have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
Page 3 - English
Publicidad
