Publicidad
Idiomas disponibles
Idiomas disponibles
Extension
Wand
Removethe extensionwand from its storage
position.
Removethe crevicetool from its storageposition
in the wand.
Remove hose from the floor nozzle and attach
the extension wand. Attach the extension wand
onto the open end of the hose.
Add the crevice tool to the end of the wand by
inserting and twisting slightly. The crevice tool
doubles as a wand extension. The dusting
brush/upholstery tool will fit onto its tip, allowing
for maximum cleaning reach. The brush/tool may
also be attached directly to the shorter extension
wand.
i!::._
The dusting brush has two options. When the
front brush is removed the remaining part can
be used as an upholstery tool.
Upholstery_@
Brush
CAUTION
When using attachments, be careful
not to overextend the hose when
reaching. Trying to reach beyond the
hose stretch capability could cause
the cleaner to tip over.
TO STORE ATTACHMENTS
Remove dusting brush/upholstery tool from
wand. Snap into its storage location.
Remove crevice tool from the wand by twisting.
Remove the short extension wand from the hose
by twistingthe wand and pulling it from the hose end.
Placethe crevicetool down into the short extension
wand. Snap wand into its storage location.
Be sure the unit is turned off. Reinsert the hose
fully into hose coupling from which it was
removed. Press firmly to assure connection.
WARNING
Personal Injury Hazard
DO NOT place hands or feet
underneath the unit when inserting the
hose. The agitator revolves rapidly
when the vacuum is turned on.
-8-
Publicidad
