Publicidad
Idiomas disponibles
Idiomas disponibles
SANDING
This sander can be used for sanding operations
on materials
such as wood,
plastic, metal and painted surfaces.
Do not use the sander for wet sanding.
_,
WARNING:
Finish sanding can produce
clouds of fine sanding dust that
could ignite in the presence of sparks or an open flame. To avoid injury, always
use your sander in a well-ventilated
area, away from sparks and flames.
_,
WARNING:
Before sanding,
make sure that the sanding
belt is securely
installed
in place.
1.
Secure the workpiece
with clamps or other means to keep it from moving
while sanding.
2.
Do not force the tool. Excessive
pressure will overload the motor, causing
possible
damage from motor overheating,
and can result in inferior work.
NOTICE:
Check to make sure that the red pressure control indicator
Bight
never illuminates.
3.
Do not allow sanding on one spot too long, as the sander's
rapid action may
remove too much material and make the surface uneven.
4.
Hold the sander with both
hands firmly on the
handles (Fig. 10).
5.
Start the sander while it is
off the work surface to avoid
gouging.
6.
Gradually
lower the sander
onto the workpiece
with a
slight forward movement.
Move it slowly, using forward
and backward
strokes.
Fig. 10
7.
When you stop, lift the sander
from the surface before stopping
the tool.
NOTICE:
Never start or stop the sander with the sanding belt in contact with the
work surface.
17
Publicidad
