Resumen de contenidos para Ameriwood HOME 8393341COM
Página 1
Easy Tough Assembly Difficulty Meter WARNING Follow Ameriwood Home - Unit can tip over causing severe injury or death. - Anchor unit to stud in wall (if instructed to). - Do Not allow children to climb on unit. - Put heavy items on lower shelves or drawers.
Página 2
Contact Us! Do NOT return this product! Contact our friendly customer service team first for help. Assembly Tips Call us! 1-800-489-3351 Tube Visit ameriwoodhome.com to view the limited warranty valid in the U.S. and Canada. Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 1-2 - Open your item in the area you plan to keep it to avoid excessive heavy lifting.
Página 3
Before You Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Parts are labeled on the surface or edge of the part Give yourself enough room for the assembly process Have the following tools: #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight.
Página 4
Before You Start Please Note: You may need to lightly tap the wood dowels into the holes during your assembly process. ameriwoodhome.com...
Página 5
Board Identification Not actual size (x2) Fixed Shelf 38393341030 Adjustable Shelf 38393341050 38393341040 Bottom Upper Back Panel (x2) 38393341060 38393000070 Stringer 38393000080 Left Panel Right Panel 38393341010 38393341020 Apron Valance Kick Door Molding Door Panel 38393341100 38393341090 38393341110 38393341130 38393341120 ameriwoodhome.com...
Página 6
Board Identification Not actual size (X3) (x3) (x3) Drawer Front Drawer Front Molding Drawer False Front 38393341140 38393341150 39991167047415F BACK SIDE SIDE (x3) (x3) (x3) Drawer Side Left Drawer Side Right Drawer Back 39991167340430L 39991167340430R 39991167047415B BACK (x3) Back Panel Drawer Bottom K839334100 39991324048520D...
Página 7
Board Identification Not actual size SIDE BACK BACK SIDE ameriwoodhome.com...
Página 8
Note: Your unit may contain extra hardware. Part List Actual Size (x24) (x24) (x12) (x24) (x21) (x3) #A22620 #A22610 #A21670 #A23025 #A12810 #A22770 cam lock cam bolt wood dowel confirmat screw #8 x 1" screw quicklock (x40) (x10) (x4) (x8) #A12120 #A54710 #A13950...
Página 9
Note: Your unit may contain extra hardware. Part List Actual Size (x3) (x6) (x1) #A65685 #A11070 #A65690 hinge plate eruo screw glissando soft close Not Actual Size (x3) (x3) (x1) #A65680 #A56100 #A81930 euro hinge slide wardrobe rail ameriwoodhome.com...
Página 10
Note: Your unit may contain extra hardware. Part List Not Actual Size Your unit comes with four (4) drawer slides. For each slide, extend the slide as shown and press the release lever to remove the inner slide. Set the inner slide aside for later. For Step 3 and 4, you will be attaching the slide to the panels at the rear of the slide.
Página 21
STEP 11 Place your unit on its front. Slide back Panel into the grooves in the Left & Right Panels (A & B). BACK unfinished side ameriwoodhome.com...
Página 22
STEP 12 (x4) BACK Line up bottom of Back Panel with bottom edge of Bottom (F). ameriwoodhome.com...
Página 23
STEP 13 (x10) (x4) (x4) Slide the Wedges (1) into the groove against the back Panel, and secure with screw. Tap in T-Nut (14) with a hammer. Screw in Glides (13) all the way. ameriwoodhome.com...
Página 24
STEP The next steps are to assemble your unit to the wall Assembled unit MUST be square on the height, width, and depth to function properly Assembled unit MUST be placed flat against the wall Assembled unit MUST be screwed into wall studs at the top and bottom for safety You need to locate 2 studs DO NOT use wall anchors to fasten your unit to the wall...
Página 25
STEP 14 Place your unit FLUSH against the wall There are notches provided at the back of your unit. These notches are to fit around the baseboard on your wall. If your baseboard is higher or thicker than the notches provided on the unit, you will need to remove the baseboard, cut it down to fit on both sides of your...
Página 26
STEP 15 Assembled unit MUST be square on the height, width, and depth to function properly A ladder will be required. Do not lean against the top of the unit, it may cause sagging. If required, unscrew the Glides counter-clockwise as necessary in all 4 corners until your unit is level in all directions.
Página 27
STEP 16 Locate the studs in the wall using a stud finder. Using a pencil, mark the stud locations at the top of the Upper Back Panel (G) and on the Stringer (H). You need to locate 2 studs (2 marks at the top &...
Página 28
STEP 17 A ladder will be required. Do not lean against the top of the unit, it may cause sagging. (x4) First, make sure that your unit is still level in all directions. Drill 1/8" (3mm) pilot holes through the Upper Back Panel (G) and through the Stringer (H) at the the stud locator marks.
Página 29
STEP 18 (x6) (x18) SIDE SIDE Inner Slide Use these holes ameriwoodhome.com...
Página 30
STEP 19 (x12) SIDE SIDE ameriwoodhome.com...
Página 31
STEP 20 (x12) BACK SIDE SIDE ameriwoodhome.com...
Página 33
STEP 22 Install drawers by engaging the inner slides (attached to the Drawer Sides) with the outer slides (attached to the Left and Right Panel). Push in until the plastic lever snaps into the outer slide. Outer Slide Note: To adjust Drawer Fronts, loosen screws (5), make needed adjustments and retighten.
Página 36
STEP 25 (x2) (x2) (x3) Arrow faces front of unit. ameriwoodhome.com...
Página 37
STEP 26 Door is reversible. If you would like the door to open from other side, repeated steps 25 and 26 with the parts installed on the opposite side panel. hook Eccentric adjustment screw. Shifts the whole hinge up and down. Adjust the gaps between the door and the left and right panels (side to side)
Página 38
STEP 27 This step is optional... Place Glissando Soft Close (17) on the lower hinge of the door (L). ameriwoodhome.com...
Página 39
STEP 28 This step is optional... (x4) (x1) To use optional Wardware Rail. Remove adjustable shelves (D) and screw Wardrobe Rail (21) into bottom side of Top (C). ameriwoodhome.com...
Página 40
Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 10 lbs (4.54 kg) Adjustable Shelf 30 lbs (13.63 kg) Fixed Shelf 40 lbs (18.18 kg) Drawers 25 lbs (11.36 kg) Warning: Risk of injury to persons - do not place a television on this furniture.
Página 41
Visit your local retailer's website, rate your purchased product and leave us some feedback! We would like to extend a big "Thank You" to all of our customers for taking the time to assemble this Ameriwood Home product, and to give us your valuable feedback. ameriwoodhome.com...
Página 42
Espa ol Cubierta Delantera Este libro de instrucciones contiene informaci n IMPORTANTE de seguridad. Por favor lea y mant ngalo para referencia en el futuro. No Regrese este producto! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda.
Página 43
Espa ol P gina 5 - Identificaci n de la tabla P gina 8 - Lista de piezas No est a escala real Escala real Cerradura de leva (1) Panel izquierdo (A) Panel derecho (B) Perno de leva (2) Parte superior (C) Clavija de madera (3) Estante ajustable (D) Tornillo Confirmat (4)
Página 44
Espa ol P gina 16 - G rela en el sentido de las agujas del reloj para bloquearla P gina 17 - Orientaci n exterior de la cerradura de leva P gina 21 - Coloque la unidad boca abajo. *Deslice el panel tresero en las ranuras de los paneles izquierdo y derecho (A y B) *lado sin acabado P gina 22 - Alinee la parte inferior del panel trasero con el borde inferior de la parte de abajo (F) P gina 23 - Deslice las cu as (10) en la ranura contra el panel trasero y f jelas con tornillos.
Página 45
Espa ol P gina 27 - Localice los montantes en la pared utilizando un localizador de montantes. Con un l piz, marque la ubicaci n de los montantes en la parte superior del panel posterior superior (G) y en el larguero (H).
Página 46
Visite el sitio web de su tienda local, califique su comprado y denos sus comentarios! Nos gustar a enviar un gran "Agradecimiento" a todos nuestros clientes por tomarse el tiempo de ensamblar este producto de Ameriwood Home, y por darnos sus valiosos comentarios. Gracias ameriwoodhome.com...
Página 47
Fran ais Couverture Avant CE LIVRET D'INSTRUCTION CONTIENT DES INFORMATIONS IMPORTANTES SUR LA S CURIT . VEUILLEZ LIRE ET GARDER POUR UNE R F RENCE FUTURE Ne retournez pas ce produit! Contactez notre quipe de service la client le amicale d'abord pour obtenir de l'aide.
Página 48
Fran ais Page 5 - Liste des pi ces Page 8 - Liste des pi ces Taille non r elle Taille r elle Panneau gauche (A) Serrure came (1) Panneau droit (B) Boulon came (2) Panneau sup rieur (C) Cheville en bois (3) Tablette r glable (D) Vis de contr le (4) tag re fixe (E)
Página 49
Fran ais Page 16 - Tournez dans le sens des aiguilles d'une montre pour verrouiller la bonne place. Page 17 - Orientation correcte de la serrure came Page 21 - Placez votre unit sur sa face avant. * Glissez le panneau arri re dans les rainures des panneaux gauche et droit (A et B). * C t inachev Page 22 - Alignez le bas du panneau arri re avec le bord inf rieur du fond (F).
Página 50
Fran ais Page 27 - Rep rez les montants dans le mur avec un doigt d'indexation. l'aide d'un crayon, marquez l'emplacement des montants en haut du panneau arri re sup rieur (G) et sur le longeron (H). * Vous devez rep rer deux montants (deux marques en haut et deux marques en bas). * Une chelle est n cessaire pour cette tape.
Página 51
Visitez le site Web de votre d taillant local, valuez votre produit achet et laissez-nous quelques commentaires ! Nous tenons offrir un grand "Merci" tous nos clients pour avoir pris le temps d'assembler ce produit "Ameriwood Home", et de nous donner vos commentaires pr cieux. Merci ameriwoodhome.com...