Publicidad
Ignition OFF
Ignition ON
Ignition ON
Ignition ON
Ignition ON
Indicator failure detection and lamp substitution if the trailer indicators fail
The failure of a single or on both trailer indicators will be shown depending on the type of vehicle and electric kit installed as follows:
Increase in the flashing frequency
Text message in the Display / combi-instrument
Activated control lamp for light failure
Audible warning via Buzzer or Voice-Message
If an indicator fails the left or right light compensates the faulty indicator by flashing at the correct frequency! ( lamp substitution).
/
87502692/03.03.2022
© ConWys AG / www.conwys.ch / mail to: info@conwys.ch
Diagnosis function of control LEDs
GN
RD
GN
GN
RD
or
RD
RD
=
No CAN-Data
CAN-Data Wire
/31:
B+/30:
PIN 2 oder/or 4
Standby /
Sleepmode
PIN 13+14
PIN 1
Publicidad
