Westinghouse Digital VR-6090Z Manual Del Usuario página 20

MENU OPERATION
4.Use the UP/DOWN buttons to select an option of the sub-menu, and press the RIGHT button.
While in adjustment mode, use the LEFT/RIGHT button to change the value of the item.
5.Press the MENU button to exit the menu.
Note:
Only when you input the suitable signal, the relevant items can be activated.
1.Press the POWER button to turn the LCD TV on.
2.Press the MENU button on the remote control, the on-screen menu will appear on the screen.
3.Use the LEFT and RIGHT buttons to select your main menu option.
Select TV source for example.
1. Press the MENU button on the remote control to display
the Main menu, and use the LEFT and RIGHT Picture Mode
buttons to select the PICTURE. REA
2. Use the UP and DOWN buttons to highlight an individual oe
PICTURE option, use the LEFT and RIGHT buttons to change Grants —
the setting, and press the MENU to exit the menu. Color Tamp. « Neutral >
Control MEMC level < off
@@ select
The PICTURE menu includes the following options :
Picture Mode
Cycles among picture display modes: Standard, Dynamic, Movie, User.
Contrast
Controls the difference between the brightest and darkest regions of the picture.
Brightness
Controls the overall brightness of the picture
Color
Control the color.
Sharpness
Increase this setting to see crisp edges in the picture; decrease it for soft edges .
Color Temp.
Cycles among color temp: Neutral, Warm,Cool.
Control MEMC level
Control the MEMC of the picture: Off/Low/Neutral/Strong.
18