ENGLISH
Hardware requirements:
• Devices with a free USB-C, USB4 or Thunderbolt™ 3/4 port
Requirements for the Power Delivery function:
• Devices with a free USB-C, USB4 or Thunderbolt™ 3/4 port with Power Delivery
support
Video output requirements:
• Devices with a free USB-C or USB4 port with DisplayPort Alternate Mode support or
Thunderbolt™ 3/4 port
Operating system:
• Windows 10 / 11, macOS*, iPadOS**, Android**, Chrome OS and Linux with the latest
updates
* macOS does not support Multi Stream Transport (MST) technology. Connecting two monitors to a
macOS station will cause both monitors to display the same image.
** iPadOS, Android systems do not support multi-screen image transfer technology or the expanded screen
option. This means that only the mirrored screen will be displayed when connected to an external monitor.
(Not valid for Android devices with DEX and Easy Projection extensions)
INSTALLING DRIVERS
Windows:
Only if a problem is detected with the LAN adapter, for example:
In case of outages, slow network and in case of poor or no LAN detection.
You can download LAN drivers here in Manuals, Drivers section
https://i-tec.pro/en/produkt/c31triple4kdockpd-2/
macOS:
No driver installation required
SAFETY INSTRUCTIONS FOR USING THE DOCKING STATION
• Do not expose to extreme temperatures and humidity.
• Use the device on flat pads to avoid slipping and falling on the ground.
• Keep the drivers and manual for later use.
• Avoid straining the USB-C port or cable.
• Restart the product periodically using the ON/OFF button or by removing it from the
power supply. By switching off the ON/OFF switch or by switching off the power supply.
• Do not plug USB-C PD adapters into USB-C ports that are not marked as ports to connect
USB-C PD power adapter.
• It is recommended that you switch off the docking station at the end of the day.
In cooperation with the service department:
• Check functionality after falling into water or on the ground.
• Verify functionality when the cover is cracked.
• Complain about the device not working according to the manual.
8
Quick Start