your phone for instructions).
2.
Now please turn on the Bluetooth headset, the blue LED will flash for 4 times, then automatically
enter into the pairing mode, the blue LED and red LED will flash in turn. Then the headset is ready to be
paired. (Note: If the headset paired already, it will automatically omit this step).
3. Set the phone to search for Bluetooth devices. (See the user guide of your phone for instructions).
4. Select the headset BML-03 from the phone list of found devices.
5. Enter the pass key 0000 to pair and connect the headset to your phone. For some phones you may
need to make the connection separately after pairing (See the user guide of your phone for details).
You only need to pair the headset with your phone for one time.
When the headset is connected to the phone and ready for use, the headset beeps, and the blue
indicator light flashes 1 time every 10 seconds. The headset model appears in the phone menu where
you can view the current paired Bluetooth devices.
【Note】 :If the headset can not connect any compliant mobiles or other devices successfully within 20
minutes after it turns on, the headset will turn off automatically.
Disconnecting the Headset
To disconnect the paired headset from your phone (for example, to connect the phone or headset to
another Bluetooth device), turn off the headset, or disconnect the headset from the Bluetooth menu of
your phone. You do not need to delete the paired headset from the phone in order to disconnect it.
Reconnecting the Headset
To reconnect the paired headset to your phone:
The status of paired headset and
The paired phone turns on,
The paired headset turns on,
phone turns off
If cutting the connection from phone's
Bluetooth menu, but headset is still on
Both paired headset and phone are on,
phone
headset turns off
Reconnecting methods
Turn on the headset,it will connect
with phone automatically
Turn
on
the
phone,press
headset
MFB button, it will connect
automatically or connect from
phone's Bluetooth menu.
Connect from phone's Bluetooth
the
5