EN
OPERATING INSTRUCTION
INSTRUKCJA OBSŁUGI
HAIR DRYER IZ8801
SUSZARKA DO WŁOSÓW HT260
GENERAL DESCRIPTION
1.
On/Off switch with power settings
2.
Heat level switch
3.
"Cool shot"
4.
Styling nozzle
5.
Removable air intake housing
6.
Hang up loop
7.
Power cord
8.
Diffuser
INTENDED USE
The dryer IZ8801 is designed for drying hair.
OPERATION
•
Before connecting the hair dryer to the power source, make sure that the switch (1)
is set to position "0".
•
After connecting the appliance to the mains with the parameters as specified
in the manual, start the appliance with the switch (1).
pos. "0" - dryer switched off,
pos. "
pos. "
•
Adjust air temperature using the switch (2):
pos. " " - low temperature for slightly damp, not too thick or short hair,
pos. " " - medium temperature,
pos. " " - high temperature, fast drying of wet or thick hair.
•
Pressing and holding the " " button (3) immediately lowers the temperature of the air
coming out of the dryer regardless of the temperature selected with the switch (2).
•
The concentrator (4) and diffuser (8) facilitate hair modelling. The tips (4) and (8) should
be used interchangeably. You can also use the hair dryer without the tips (4) or (8) in place.
CLEANING AND MAINTANANCE
•
Before cleaning unplug the hair-dryer and wait until it cools down completely.
•
Never immerse the hair-dryer in water.
•
Casing and power cord can be cleaned with soft dry or slightly damp cloth.
•
The air inlet and outlet should be cleaned with soft brush.
•
Air intake can be cleaned after the removal of the housing (5).
In order to remove the housing (5), you should press the elements and move it forward.
WARRANTY
•
This appliance is designed for domestic use only.
•
It cannot be used for professional purposes or for other than the intended use.
•
Improper use will nullify the guarantee.
" - weak airflow,
" - strong airflow.
TECHNICAL DETAILS
•
power: 2000W
•
mains supply:
220-240V~ 50-60Hz
11