Kenmore Elite 625.385010 Manual Del Propietário página 3

Unpack and Check Shipment ...................................................................... 4
Plan Your Installation ............................................................................. 5
Step I-Install Supply Water Fitting .................................................................. 6
Step 2-Install Filtered Water Faucet ................................................................. 7
Step 3-Connect Tubes ............................................................................. 8
Maintenance ................................................................................... 9
Specifications .................................................................................. 10
Troubleshooting ................................................................................ 10
Exploded View & Parts List ........................................................................ 11
• Read all steps and guides carefully before installing
and using your Advanced Two-Stage Drinking Water
Filter. Follow all steps exactly to correctly install.
Reading this manual will also help you to get all the
benefits from the Advanced Two-Stage Drinking Water
Filter.
• Do not attempt to use this product to make safe drink-
ing water from non-potable water sources. Do not use
the system on microbiologically unsafe water, or water
of unknown quality without adequate disinfection
before or after the system. This system is certified for
cyst reduction and may be used on disinfected water
that may contain filterable cysts.
• Check with your local public works department for
plumbing and sanitation codes. You must follow their
guides as you install the system. Follow your local
codes if they differ with guides in this manual. In
Massachusetts, plumbing code 248-CMR 3.00 and
10.00 shall be adhered to. Consult with a licensed
plumber.
The Advanced Two-Stage Drinking Water Filter works
on water pressures of 30 psi (minimum) to 125 psi
(maximum). If your house water pressure is over the
maximum, install a pressure reducing valve in the
water supply pipe to the Advanced Two-Stage
Drinking Water Filter.
Do not install the Advanced Two-Stage Drinking Water
Filter outside, or in extreme hot or cold temperatures.
Temperature of the water supply to the Advanced
Two-Stage Drinking Water Filter must be between
40°F and 100°F. Do not install on hot water.
Questions? Call The Kenmore Water Line 1-800-426-9345 or visit KenmoreWater.com
3