E
WARNING
Always unplug power cord from electri-
cal outlet before performing any ser-
vice on vacuum.
TO REMOVE
DUST
BIN
Lift dust bin handle located at the top of
the dust bin.
Handle
Dust
Bin
Pull the handle up
and lift dust bin up
and out of the vac-
uum cleaner.
Remove any clogs that might be located in
the suction port or filter port area.
Filter Pot
TO EMPTY DUST BIN
Before removing debris from dust bin it is a
good idea to move the dust bin filter clean-
ing lever back and forth several times.
Moving the lever
back and forth
loosens the dust
and debris
that
has attached
itself to the filter
element
inside
the dust bin.
Dust BIn_.
Filter
-
Cleaning
Lever
_
Rotate dust bin handle to the vertical posi-
tion.
Hold dust bin
over a trash con-
tainer.
Dust Bin
Press the dust
bin door release
button down-
Door
ward to release
Release
the door.
Button
The door will
swing open and
the debris will
fall into the trash
container.
Emptying
Shake the dust
Door
bin to release
and debris
that might hang in the filter ele-
ment.
Note: See PRIMARY FILTER REMOVAL
AND CLEANING section.
Door
Door
Latch
After the dust bin is
empty of debris,
firmly close the
door. Make sure
you hear a "click"
sound to indicate
that the door is fully
latched.
TO REPLACE
DUST BIN
Place dust bin back
into vacuum cleaner
by insertingthe bot-
tom first and tilting
back with the dust bin
handle raised.
Dust Bin -
Handle
Lower the dust
bin handle to
lock dust bin in
noticeable
should
be heard.
14