Publicidad
Idiomas disponibles
Idiomas disponibles
· Before laser engraving , you should have adequate knowledge of: physical properties of laser radiation, hazardous classification of laser
and relevant health implications and safety measures.
· During laser engraving, do NOT look directly at or touch the laser aperture, or expose your body to the laser.
· During operation, the material being engraved or cut may release toxic and harmful gases or smoke. Please make a comprehensive judg-
ment based on the type and composition of the material. It is recommended to use the product with an air purifier or in a well-ventilated
place, so that the toxic and harmful gases or smoke generated can be effectively adsorbed, thus protecting your health and preventing
environmental pollution.
· Reflective materials can cause laser reflection and injury. Please remove all reflective materials from the work area before use and during
operation. It is suggested to blacken the area to be engraved by a whiteboard marker beforehand when engraving the reflective material.
· Please power the device with the power and type (12V
5A power adapter) indicated in the user manual. Mismatched power adapter will
cause malfunction.
· Before laser engraving, please make sure to take safety protection measures, such as wearing safety goggles to prevent eye or skin injury,
removing irrelevant objects to prevent damage caused by laser radiation, and moving away flammable and explosive objects to avoid fire.
· After initiating engraving, do NOT move the device, otherwise it may trigger emergency stop as the gyroscope detects the machine
inclination, therefore affecting the final engraving result.
3
Emergency Response
· Please take the following measures when there is open fire during engraving
（1）Cut off the power supply.
（2）Douse the flames with fire extinguisher.
· Inhale smoke and particulate matter
（1）Smoke and particulates that can irritate the respiratory system may be generated when engraving or cutting certain materials.
It is recommend to use the product with an air purifier or in a well-ventilated place. Please wear a protective mask if necessary.
（2）If respiratory irritation or similar symptoms occur, immediately move the patient to a site with fresh air and seek medical help.
17
Publicidad
