Publicidad
Idiomas disponibles
Idiomas disponibles
VII. Connecting to Bluetooth
To put your Boombar Air in Bluetooth mode, press the "MODE" button on the
remote control until it is in Bluetooth mode (bt).. Immediately you'll see that the
panel starts to flash, which means the soundbar is ready to pair. Then, check the
Blueetooth signal menu and look for KSB-301. Click on it, and voilá,
you are connected.
VIII. Let's put it together
Follow the instructions and the graphic below to install your soundbar. Remember,
you can place the subwoofer anywhere in the room... Enjoy the sound!
• Soundbar
Assembly
1. Locate 4 pins on one end of the soundbar right unit.
2. Connect those pins to the four holes on the corresponding end of the soundbar
left unit.
3. Slightly rotate the right unit clockwise to secure and align both sides.
4. Connect the units using the provided bar link cable in the corresponding ports on
the back of the soundbar.
Note: These two soundbar units can't work separately.
• Subwoofer
Cable connections
5. Connect the AC power cable from the subwoofer to an outlet on the wall.
6. On the back side, find the power switch to turn on the subwoofer.
6
I
O
Publicidad
