Bralo HT-40 Manual De Instrucciones página 14

BRALO
• Only kits supplied by BRALO should be used
for the brand rivets.
• Disconnect the air supply before installing or
adjusting the kits.
• When disconnecting the air hose, make sure
that there is no pressure.
• The user must maintain the riveting machine
in a safe working condition and in a clean
working area.
• The machine must be operated at all times
in accordance with current Health and Safety
legislation.
• Take care not to operate the riveting machine
when it is pointed at any person or at the
operator.
• The tool should not be pulled by the hose or
gun but by the control unit, taking the hand off
the trigger to avoid trigger actuation. Keep the
hose away from heat sources or sharp objects.
• Remember that the air pressure must not
exceed 7 bar and the air inlet must not exceed
8 bar.
• Care should be taken not to spill hydraulic oil
and clean up thoroughly with water and alkaline
soap if spilled on the skin.
• Remember to use ISO VG 32 oil for
maintenance work.
9. KITS
REFERENCE
05BM3002020 KIT RIVETING Ø6,5 STRUCTURAL
05BM3002010 KIT RIVETING Ø9,7 STRUCTURAL
05BM3002021* KIT RIVETING Ø4,8 BRALOCK
05BM3002022* KIT RIVETING Ø6,4 BRALOCK
05HT00B0800 KIT RIVETING Ø8,0 BRALOCK
05BM3002023* KIT RIVETING Ø4,8 UNILOCK
05BM3002024* KIT RIVETING Ø6,4 UNILOCK
05BM3002025 KIT RIVETING Ø8,0 UNILOCK
05BM3002026 KIT RIVETING Ø10,0 UNILOCK
05BM3002029 KIT RIVETING Ø4,8 ESTRUBOLT
05BM3002027 KIT RIVETING Ø6,4 ESTRUBOLT
05BM3002028 KIT RIVETING Ø8,0 ESTRUBOLT
* These kits need the adapter 05BM3001023
www.bralo.com
EN
6. STORAGE
Para el correcto
herramienta si no va a ser utilizada durante un
período de tiempo, se deberá tener en cuenta
los posibles impactos, lugares de tensiones,
variaciones térmicas, humedad y sustancias
corrosivas.
7. SPECIFICATIONS
Weight
Gun weight
Dimensions of the
Control Unit (mm)
Gun dimensions (mm)
Air pressure (bar)
Maximum power at 6 bar
Piston travel (mm)
Hydraulic oil
Oil pressure at 6 bar
Intensification ratio
8. CONTENTS
Inside the packaging you will find the instruction
manual and a bag with the air connection and
the key to open the control unit.
The customer shall purchase the necessary
consumables according to his needs.
KIT
14
almacenamiento de
28 Kg
1,7 kg
495 x 295 x 250
320x 170
6-7 bar
40000N
32 mm
ISO VG 32
300 bar.
1:50
la