Publicidad
Idiomas disponibles
Idiomas disponibles
En
Support
TROUBLESHOOTING
For latest FAQs, visit
LucidSound.com/support
Why do I hear static or no sound?
Ensure the Wireless Headset is paired with
the console/device by referencing the LED
indicators. Make sure the Volume Wheel is not
set to minimum. On Xbox make sure that the
Game/Chat Balance Wheel is not maxed out
to either Game or Chat audio. Check console/
device menu settings to ensure sound is being
output to the headset.
Why can't my friends hear me?
Make sure that the Boom Mic is securely at-
tached to the headset, and that the Boom Mic
LED is not on. Check console/device menu
settings to ensure the headset microphone is
selected for input.
COMPLIANCE IDENTIFICATION
TRANSMITTER
Model: XBHS0007 TX
FCC ID: YFK-LS100XAB
IC: 9246A-LS100XAB
HEADSET
Model No.: XBHS0007-01
FCC ID: YFK-LS100AA
IC: 9246A-LS100AA
RF FREQUENCY: 2.402 GHz to 2.480 GHz
8
OUTPUT POWER: TX=7dBm; RX=9dBm
INPUT POWER: 3.7V, 850mAh
MANUFACTURER: ACCO Brands USA, LLC
4 Corporate Way, Lake Zurich, Illinois
60047 United States
ACCOBrands.com | LucidSound.com
Made in China
FCC STATEMENT
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful inter-
ference, and (2) this device must accept any
interference received, including interference
that may cause undesired operation.
WARNING: Changes or modifications to this
unit not expressly approved by the party re-
sponsible for compliance could void the user's
authority to operate the equipment.
NOTE: This equipment has been tested and
found to comply with the limits for Class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equip-
ment and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/
TV technician for help.
FCC Caution: To assure continued com-
pliance, any changes or modifications not
expressly approved by the party responsible
for compliance could void the user's authority
to operate this equipment. (Example - use only
shielded interface cables when connecting to
computer or peripheral devices).
FCC Radiation Exposure Statement:
This equipment complies with FCC RF
radiation exposure limits set forth for an
uncontrolled environment.
This transmitter must not be co-located
or operating in conjunction with any other
antenna or transmitter.
CAN ICES-003(B)/NMB-003(B)
This device contains licence-exempt trans-
mitter(s)/receiver(s) that comply with Inno-
vation, Science and Economic Development
Canada's licence-exempt RSS(s). Operation
is subject to the following two conditions:
1. This device may not cause interference;
2. This device must accept any interference,
including interference that may cause unde-
sired operation of the device.
This equipment complies with IC RSS-102
radiation exposure limit set forth for an uncon-
trolled environment.
IC SAR COMPLIANCE
This equipment could be installed and operat-
ed with minimum distance 0cm between the
radiator and your body. End user must follow
the specific operating instructions for satisfy-
ing RF exposure compliance. This transmitter
must not be co-located or operating in con-
junction with any other antenna or transmitter.
The portable device is designed to meet the
requirements for exposure to radio waves
established by the ISED. These requirements
set a SAR limit of 1.6 W/kg averaged over
one gram of tissue. The highest SAR value
reported under this standard during product
?#!*
certification for use when properly worn on
the body/ head.
HEARING DAMAGE RISK
High sound pressure! Do not listen
at high volumes for long periods.
BATTERY WARNING
Don't attempt to replace the rechargeable
battery yourself- you may damage the battery,
which could cause overheating, fire, and injury.
The Lithium-ion battery in your device should
be serviced or recycled by PowerA or an
authorized provider and must be recycled or
disposed of separately from household waste.
Dispose of batteries according to your local
environment laws and guidelines.
Don't use or leave the product containing
rechargeable batteries exposed to very high
or very low temperature (e.g. at strong direct
sunlight or in a vehicle in extremely hot or
extremely cold weather), or in an environment
with extremely low air pressure can result in
an explosion, fire, or the leakage of flammable
liquid or gas.
Don't use this product in a location where
static electricity is rich, otherwise, the internal
safety devices may be damaged, causing a
harmful situation.
In case the electrolyte gets into the eyes
Publicidad
