Publicidad
Idiomas disponibles
Idiomas disponibles
PREPARATION FOR USE
LANGUAGE
SELECTION
If you want to change the language of the on-screen menu, follow the procedure below.
Connect the power cord to a standard AC outlet.
Press the POWER button to turn on the TV.
Press the MENU button so that the menu display appears
on the TV screen.
Press the CH(annel) A or Y button to point to "[ENGLISH]".
Select "ENGLISH" or "ESPAÑOL" = Spanish by using
the VOL(ume) A or Y button.
[ 6 |
Press the MENU
button to exit the menu.
» PICTURE
CHANNEL SET
CAPTION [OFF] _
[ENGLISH]JESPANOL
PICTURE
CHANNEL SET
CAPTION [OFF] _
p> [ENGLISHJESPAÑOL
CHANNEL
PRESEFTING
To preset a channel or to change a preset channel, follow the procedure below.
Press the POWER button to turn on the TV.
Press the MENU button so that the menu display appears
on the TV screen.
Press the CH(annel) A or Y button to point to "CHANNEL SET".
Then, press the VOL(ume) A button.
> PICTURE
CHANNEL SET
CAPTION [OFF]
[ENGLISH]ESPAÑOL
PICTURE
> CHANNEL SET
CAPTION [OFF] _
-
[ENGLISH]JESPANOL
OPERATIONS
WATCHING
A FV PROGRAM
Press the CH(annel) A or Y button to point to "AUTO MEMO".
Then, press the VOL(ume) A button.
The tuner scans and memorizes all active channels in
your area.
O The TV distinguishes between standard TV channels
and cable channels.
@ When AUTO MEMO action is completed, the lowest
memorized channel reappears on the screen.
O When you press the CH(annel) A or Y button after
selecting AUTO MEMO, the tuner will stop at the memorized
channels only.
ADD/DELETE
»
AUTO MEMO
[ADD/DELETE FUNCTION]
1) Press the MENU button so that the menu display appears on the TV
screen.
2) Press the CH(annel) A or Y button to point to "CHANNEL SET".
Then, press the VOL(ume) A button.
3) Press the VOL(ume) A button so that "ADD/DELETE" is selected.
4) Use the CH(amnel) A or Y button to select the
channel you wish to put into memory or to erase from memory.
Note: The display will return to the screen in about 10 seconds.
Perform "ADD/DELETE"" function while this display appears on the
screen.
|
O Press the VOL(ume) A or Y button to light up the channel number
in LIGHT BLUE if you wish to add the channel into memory.
O Press the VOL(ume) A or Y button to light up the channel number
in LIGHT RED if you wish to erase the channel from memory.
5) Press the MENU button to exit the menu.
PICTURE
> CHANNEL SET
CAPTION [OFF] _
[ENGLISH]ESPANOL
>
ADD/DELETE
AUTO MEMO
PICTURE ADJUSTMENT
1) Press the POWER button to turn on the TV.
2) Select the desired channel with the CH(annel) A or V button.
3) Adjust the volume to the desired listening level using the VOL(ume) A or Y button.
4) Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT" .)
SE.
i
,
OLEE
;
4
The sleep timer function enables you to shut off the power without pressing
the POWER button after a desired time period.
1) Press the POWER button to turn on the TV and press the SLEEP button
on the remote control .
2) You may change the sleep time with pressing the SLEEP
button on the remote control repeatedly. The timer is set up
SLEEP 10
to 90 minutes, 10 minutes each time the SLEEP button is
pushed. (The timer display counts up and sleep timer will
be displayed on the screen when you press the SLEEP
button on remote control.)
Note: When you disconnect the unit from the AC outlet, or if you have a power failure, the
sleep time will be lost.
|
To cancel the sleep timer:
Press the SLEEP button repeated-
ly until "SLEEP 0" is displayed.
CLOSED CAPTION
SELECTION
You may view specially labeled (cc) TV pro-
grams, movies, news, prerecorded tapes, etc.
with either a dialogue caption or text display
added to the program.
1) Press the MENU button so that the menu
display appears on the TV screen.
2) Press the CH(annel) A or Y button to point
to "CAPTION".
3) Press the VOL(ume) A or Y button to select
the mode you wish.
4) When done, press the MENU button to exit
<> : Press the VOL(ume) A or Y button.
the menu.
PICTURE
CHANNEL SET
> CAPTION [OFF] _
[ENGLISH]ESPAÑOL
PICTURE
CHANNEL SET
<P) > CAPTION, C1) |
[ENGLISH]JESPAÑOL
PICTURE
CHANNEL SET
<P) > carron| C2) _ _
[ENGLISHJESPAÑOL
PICTURE
CHANNEL SET
SP)
> caption; TH |
[ENGLISHJESPANOL
PICTURE
CHANNEL SET
P|
> caPtion; 12) _
[ENGLISHJESPANOL
1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the VOL(ume) A button so that "PICTURE" is selected.
3) Select the feature you wish to adjust with the CH(annel) A or V button and adjust it with the
VOL(ume) A or Y button.
GAME MODE
Notes:
Set to the most suitable position for TV
O In the above steps, the picture adjustment
GAME.
display will disappear from the TV screen
[+] : ON
after about 10 seconds unless you press any
[-] : OFF
buttons, even though you may not be fin-
BRIGHT
ished. Press the MENU and VOL(ume) A
button so that "PICTURE" is selected. Then,
press the CH(annel) A or Y button repeat-
edly until the display returns to the screen.
O If you adjust the other Picture control after
you set the Game mode to [ON], the Game
mode is set to [OFF] automatically. If you
want to set the Game mode, reset it to [ON].
Adjust until the whitest parts of the picture are
as bright as you prefer.
[+] : increase brightness
[-] : decrease brightness
CONTRAST
Adjust to increase or decrease contrast.
[+] : increase contrast
[-] : decrease contrast
COLOR
Adjust to be brilliant or pale color.
[+] : be brilliant color
[-] : be pale color
TINT
Adjust to obtain natural skin tones.
[+] : greenish tone
[-] : reddish tone
<> : Press the CH(annel) A or Y button.
L]
GAME MODE
[+]
OFF
ON
[-]
BRIGHT
[+]
[-]
CONTRAST
[+]
000000090000000
OOOOO0Os0080000
[-]
COLOR
[+]
[-]
TINT
[+]
Oo0poopoago0g00g
0000009400009000
Publicidad
