Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION: This unit is intended for use only with the products and/or maximum
weights indicated. Use with other products and/or products heavier than the maximum
weights indicated may result in instability or cause possible injury.
Maximum Weight:
50 pounds (22.7 kg)
That's it ! You've finished assembling your Day Bed!
ANY MATTRESS
USED IN THIS CRIB
MUST BE AT LEAST
27-1/4 INCHES BY
51-5/8 INCHES (69CM
BY 131CM) WITH A
THICKNESS NOT
EXCEEDING 6
INCHES (15CM).
The DAY BED is not
intended for children
under 15 months of
age or over 50 lbs
(22.7 kgs).
Day Bed Assembly
DAY BED ASSEMBLY INSTRUCTION:
STARTING FROM CRIB
STEP 1: Detach the side panel E from the
headboard A and bottom rail F with Allen key
STEP 2: If the mattress support G is not in the
lowest position, unscrew the mattress support
bolts from the posts and move mattress support
G to the lowest position.
STEP 3: Ensure all bolts are tightly secured.
STARTING FROM SCRATCH
STEP 1: Follow Steps 1 to 2 of the crib
assembly instruction.
STEP 2: Insert curved washers
bottom rail F.
Attach headbooards A x 2 to the bottom rail
F with bolts
using Allen key
2
.
7
into the
5 4
5
8 6
.
7
13
Publicidad
