Publicidad
Idiomas disponibles
Idiomas disponibles
Search for Sensors
If you are seeing "NO" or dashes for any sensor readings, please try the
following steps:
1.
Hold the
SENSOR
The Reception Indicator
2.
If after 3 minutes the sensor still isn't connected, bring the sensor inside next
to the display and remove power from the sensor and station.
3.
Press any button on the station 20 times and leave the parts sit for a few
moments with the power off.
4.
Install a new set of alkaline batteries into the sensor, then power up your
station again.
5.
If your sensor data is still not appearing after these steps, please contact our
support staff. For additional help visit:
Factory Restart
If your station is acting strangly, hold the
factory restart your station.
Sensor Weather Shield (not included)
• The Sensor Weather Shield is designed to protect your outdoor
sensor from rain and snow.
• This shield will offer limited protection from the sun's heat.
• Optional purchase at:
button to search for all sensors.
will begin to animate.
bit.ly/925-1418
bit.ly/basic_restart
DATE
and
RAIN
buttons together to
8
Publicidad
