Descargar Imprimir esta página

Publicidad

Enlaces rápidos

Model #
648Wc
Spencer Desk
Assembly Instructions
Congratulations!
This fine piece of furniture will make a gorgeous addition to
your home. For the best results, read the Assembly
Instructions and Finishing Hints before you begin your
project.
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, directly contact Whittier Wood Products customer
service department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: 541-687-2060
CALL US FIRST! Do not return this item to the store
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
P.O. Box 2827
Eugene, OR 97402 USA
IMPORTANT NOTES:
• For normal household use only. Not recommended for
commercial use.
Do not climb, sit or stand on this unit.
Unload items before you move this unit.
Do not overload the drawer.
Before you load or move this unit, check all screws
and supports for tightness.
• Before you begin your project, completely read the
Assembly Instructions and Finishing Hints.
• Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40°F to 90°F (not on a cold
and possibly damp cement floor).
• Periodically inspect your furniture for any loose glue
joints, screws or any other problem that might affect the
stability of your furniture. Tighten or repair as needed.
Notice to California Customers
California Prop 65 requires consumer goods to be labeled if any one of
850+ different chemicals or substances, including wood dust, is present
even in trace amounts. Drilling, sawing, sanding or machining wood
products generates wood dust, a substance known to the State of
California to cause cancer. Warning: This product contains a chemical
or substance known to the State of California to cause cancer, birth
defects or other reproductive harm.
California Health and Safety Code Section 25249.6
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
To Order: Provide the furniture model number (upper
portion of this page), the part letter, production code,
quantity needed, reason for replacement and your full
name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
Production Code:
VN
WARNING
12/13

Publicidad

loading

Resumen de contenidos para Whittier Wood Furniture Spencer 648Wc

  • Página 1 Model # 648Wc IMPORTANT NOTES: • For normal household use only. Not recommended for commercial use. Spencer Desk • Do not climb, sit or stand on this unit. • Unload items before you move this unit. • Do not overload the drawer. Assembly Instructions •...
  • Página 2 648Wc Spencer Desk — Parts List Please identify the parts and check that quantities received match what is on this list. If you need to replace a part, refer to the following letter and item name. Top Assembly Left Front Leg Right Front Leg Back Leg Side Stretcher...
  • Página 3 648Wc Spencer Desk Assembly Instructions Phillips Head Screwdriver, Tools Required: Wood Glue, Mallet or Padded Hammer, 9/16" Wrench IMPORTANT NOTE: We recommend placing a finish on this unit prior to final assembly. Before doing so, please read the enclosed Finishing Hints. Fig.
  • Página 4 Fig. 3a Fig. 3 3. Place the Top Assembly (Ac) upside-down on a clean, protected surface. Position the leg assembly on the Top Assembly flush against the outside corners of the aprons as shown in Figure 3. Insert 3/8" x 2-1/2" Hex Bolts (Nb) with Washers (Ob) through the leg brackets and into the Insert Nuts in the legs and fasten securely.
  • Página 5 Fig. 5 NOTE: Attachment of the crown assembly (steps 5 - 7) is optional. 5. Spread a thin film of glue in the dowel holes of Left Side Crown (G) and Right Side Crown (H). Attach each side apron to Back Crown (Ib). Insert 8x1-1/4" Pan Head Screws (Kb) through back crown and into side crowns.
  • Página 6 Fig. 8 8. Attach the Knobs (T) to the Drawer Assembly (J) with two 4 x 25mm Machine Screws (W) through the holes in the drawer front. See Figure 8. Fig. 9 9. Install the Drawer (J). See Figure 9. 648Wc —...
  • Página 7 Modelo # 648Wc NOTAS IMPORTANTES: • Para uso de viviendas normales únicamente. No se recomienda para uso comercial. • No se suba, no se siente ni se pare sobre este mueble. Escritorio Spencer • No mueva este mueble mientras esté lleno. Vacíelo antes de moverlo.
  • Página 8 648Wc Escritorio Spencer Lista de piezas Identifique las piezas y verifique que las cantidades que recibió coincidan con las de la lista. Si necesita reemplazar una pieza remítase a la siguiente letra y nombre de la misma. Parte Descripción Cantidad Parte Descripción Cantidad...
  • Página 9 No. De Modèle REMARQUES IMPORTANTES : 648Wc • Pour un usage domestique uniquement. Non recommandé pour un usage commercial. • Ne pas monter, s’asseoir ni se mettre debout sur cet article Bureau Spencer d’ameublement. • Ne pas déplacer cet article d’ameublement s’il est chargé. Le décharger avant de le déplacer.
  • Página 10 648Wc Bureau Spencer Nomenclature des pièces Avant de commencer le montage, identifiez les pièces et assurez-vous que les quantités reçues correspondent à celles de cette liste. Si vous devez remplacer une pièce, veuillez vous référer à la liste suivante pour le nom et la lettre de la pièce. Pièce Description Qté...
  • Página 11 Whittier Finishing Hints instructions call for a slow drying glue. Carefully read the Checklist of materials label and instructions of the glue manufacturer. Your unit □ □ □ Rubber gloves Tack cloth #220 & #320 may not need glue. □ □...
  • Página 12 Whittier Finishing Hints Preparing the surface apply additional coats. Lightly sand and wipe surface with a lint-free rag or tack cloth between coats. 1. Sand each piece with #220 grit sandpaper. Sand with the grain of the wood on flat surfaces and opposite the 4.
  • Página 13 Consejos de Whittier para terminaciones Consejos de pegado Lista de control de materiales Estos son algunos consejos generales. Consulte las □ □ □ Guantes de Paño de Papel de lija instrucciones de ensamblaje para obtener información detallada hule adherencia No. 220 y No. sobre cómo pegar el producto específico que utilice.
  • Página 14 Consejos de Whittier para terminaciones Consejos para las terminaciones Aplicación de la capa de acabado Utilice productos de la misma marca para garantizar la Siempre debe leer y seguir las instrucciones de la etiqueta. compatibilidad. No se recomienda mezclar terminaciones a Mezcle suavemente el preparado para la capa de acabado, base de solventes y a base de agua.
  • Página 15 Conseils de finition de Whittier Conseils en matière de collage Liste de vérification des matériaux Cette section contient des conseils d'ordre général. Veuillez vous □ □ □ Gants en Chiffon résiné Papier de reporter aux instructions d'assemblage pour des renseignements □...
  • Página 16 Conseils de finition de Whittier enduits de finition à base de solvant et d'eau. Lisez et suivez Lisez et suivez les instructions figurant sur l'étiquette. toujours les instructions figurant sur le produit. Mélangez doucement l'enduit de finition; n'agitez pas. Le fait d'agiter peut entraîner la formation de bulles qui seront par la L'aulne est un bois dur et poreux dont l'aspect est souvent suite difficiles à...