Publicidad
Idiomas disponibles
Idiomas disponibles
Step #3
Turn the Humidity Level ( Humidistat) Knobto HIGH (+).
Step #4
Setthe Moisture OutputControl K nobtothe desired
position.
-HIGH for fast humidifying.
High speed operation will
provide approximately
3 gallons of moisture per day.
-MED for normal operation.
-LOW for quiet nighttime operation. Low speed will
provide up to 20 hours of continuous operation on
each filling.
NOTE: IF THE HUMIDIFIER
FAN WILL NOT START
OR RESTART WHEN YOU SELECT A FAN SPEED,
THE HUMIDISTAT
MAY BE SET TOO LOW. MOVING
THE HUMIDITY
LEVEL KNOB TO A HIGHER
SETTING SHOULD START THE FAN.
The length of time your humidifier runs will vary
depending on the quality of construction
and insulation
of your room or house, as well as the fan speed.
Step #5
Adjust the round Air Outlet Grill on the top of the Upper
Motor Housing (above the fan) to direct moisture in the
desired direction. DO NOT aim the moisture flow
toward furniture or walls that could be damaged by
excessive moisture.
When a comfortable
humidity level is reached, lower
the Humidity Level (Humidistat) setting slowly until the
fan stops. The DESIRED HUMIDITY light will then
illuminate, indicating that the desired humidity setting
has been reached. The Humidistat will automatically
restart the fan each time the humidity level falls below
this setting. This "ON/OFF" cycle will continue
periodically while the humidifier is in use.
Lower the Humidity level setting if condensation
forms
on walls or windows.
Publicidad
