TREVIDEA Girmi FG86 Manual Del Usuario página 13

FG86
1 Air inlet
5 Tray
COOKING
Carefully wash all accessories and the inner housing first. Allow to ventilate the internal compartment
keeping the container (6) away for about 30 minutes. Before starting with the first cooking, turn on the
appliance for 10 minutes at the maximum temperature.
- Connect to a suitable and earthed power socket.
- Extract container (6) with care and check that the tray (5) is properly mounted on the base of container.
- Insert food in the container (6) and replace the container into the housing (3).
- If appliance went in standby, press the control panel (2). Set program, temperature, time of cooking, as
explained in following paragraphs. Press the control panel to start cooking.
Caution: Never use container (6) without tray (5). Do not touch container or inner parts of appliance
during cooking and until complete cooling. Touch only the handle (4).
- Some foods should be mixed and shaked at half cooking. Take the handle (4) and extract container (6).
Shake it, then replace in its position.
- When you ear the timer sound (5 beeps), cooking time is finished. Extract container and check if food is
ready. If not ready, replace container in its position and set additional cooking of some more minutes.
Note: appliance can be switched off manually, pressing the control panel (2).
- To remove food, take out container pour food in a dish.
Be careful to the hot steam when you remove container after cooking.
Don't turn the container (6) upside down, because oil and cooking residues on the bottom of container
could drip on the foods.
- Once cooking finished, if you want to start another one, air fryer is immediately ready.
CONTROL PANEL
A. Icons for 6 preset programs
C. Icons for functioning state
FUNCTIONING
MANUAL FUNCTION
- If appliance went in standby, press the control panel (2) for 3 seconds
(long press).
- Choose the temperature by rotating the control knob panel (2), then press
the control panel to pass to the time setting.
- Choose the cooking time by rotating the control knob panel (2), then press it to start cooking.
PRESET PROGRAMS FUNCTION
- If appliance went in standby, press the control panel (2) (short press).
- On the display the first menu (potato) lights up.
- Rotating the control panel (2) you can choose between 6 preset programs.
- Once the program is chosen, press the control panel to start cooking.
Potato - 200°C, 35 min
Meat - 180°C, 18 min
Shellfishes - 180°C, 13 min
Note. Time and temperature set on each program are studied to have correct cookings for the relative
food. It is advised to change time and temperature only based on experience (eg. Previous cookings not
finished or too long).
2 Control panel
6 Container
B. Icon time and temperature
D. Display
3 Housing
7 Air outlet (on the back)
Chicken wings - 200°C, 18 min
Fries - 200°C, 25 min
Cakes - 170°C, 13 min
4 Handle
12