Cleaning And Storage - Dörr KL-15 Manual De Instrucciones

06 | OPERATION
06.1 Charging the Li-Ion battery
The KL-15 head light is equipped with a with powerful, long-life Li-Ion battery (type 18650 3.7V 2200mAh). Before fi rst use, ple-
ase charge the supplied Li-Ion battery. For charging open the rubber cover (6). Underneath you will fi nd the Micro USB port (7).
Connect the head light to your computer using the supplied USB cable. While charging, the LED indicator (8) lights up red. After
approx. 4 hours the Li-Ion battery is fully charged and the LED indicator (8) lights up green.
06.2 Replacing the Li-Ion battery
After its service life the Li-Ion battery can be replaced. Screw-o the battery compartment cover (5) in arrow direction "Open".
Insert an appropriate Li-Ion battery (type 18650 3.7V 2200mAh) according to polarity into the battery compartment (4) and
screw on the battery compartment cover again.
06.3 Turn on/o the head light
To turn on/o the head light press the On/O button (3) at the light head.
06.4 Brightness/Sensor Mode/Strobe Mode
To adjust the brightness or for selecting the sensor mode or the strobe mode press the On/O button (3) as follows:
100% brightness (regular mode)
25% brightness (regular mode)
Strobe mode (regular mode)
100% brightness sensor mode
07 |

CLEANING AND STORAGE

Never use aggressive cleansing agents or benzine to clean the head light. We recommend a soft, slightly damp microfi ber cloth
to clean the outer parts of the device.
The head strap can be removed and washed at 30° in the washing machine. Do not tumble dry.
Store the device in a dust-free, dry and cool place. This device is not a toy – keep it out of reach of children. Keep away from pets.
press 1x in quick succession
press 2x in quick succession
press 3x in quick succession
press 1x for about 3 seconds until the sensor mode LED (2) lights up red.
By waving in front of the light head, you can switch the head light on or o .
CAUTION: When head light is in sensor mode o , the head light is still under tension and
it consumes energy. Therefore remember to turn the head light o after use.
11