Corsair Gaming K55 RGB Guía Rápida Del Usuario página 3

3
MACRO FUNCTIONS
K55 RGB gaming keyboard has dedicated G1-G6 macro keys. Those keys can be assigned to perform
certain single or multi-key press actions for quick access during the game or everyday computing.
TO RECORD MACRO
> Press MR key. The macro status LED indicator
will start blinking to indicate macro recording
mode is now on.
> Select G-key you want the macro assigned to.
The macro status LED indicator will start
blinking rapidly to indicate macro recording
is now in progress.
SPECIAL MACRO KEY FUNCTIONS
Press and hold MR key for 5 seconds to enter Special Macro Key Functions. mode The macro status
LED indicator will turn solid white to confi rm the new mode of operation. While in this mode, you
have access to three macro key functions.
Enabling, Disabling, and Removing Macros
Once you're in this mode, press one of the G1–G6 macro keys to check the respective macro's status.
A rapidly blinking LED light will indicate the macro's status:
> it blinks once to confi rm that the G key is enabled,
> and twice to confi rm that the G key is disabled.
All of the G1–G6 macro keys are enabled by default.
You can keep pressing the G key to enable or disable the macro; the LED light will always refl ect the
macro's current status.
TO DISABLE ANY G1-G6 MACRO KEY
> Press any G1-G6 key to disable the macro key
without deleting action (if previously
assigned). The macro status LED indicator will
blink rapidly twice to confi rm selected key is
now disabled.
TO ENABLE ANY G1-G6 MACRO KEY
> Press any G1-G6 key again to enable the
macro key. The macro status LED
indicator will blink rapidly once to confi rm
selected key is now enabled.
> Every keypress will now be recorded.
> Press MR key to stop recording. The macro
status LED indicator will stop blinking and
turn off .
TO EXECUTE MACRO
> Press any G1-G6 key to play previously
recorded macro.
TO DELETE MACRO ASSIGNED TO G1-G6
MACRO KEY
> Press and hold any G1-G6 key for 3 seconds
to delete macro previously assigned to the key.
The macro status LED indicator will blink
rapidly three times to confi rm macro has
been deleted.
To exit Special Macro Key Functions mode, press
and hold MR key for 5 seconds. The macro status
LED indicator will turn off to confi rm.
BACKLIGHTING MODES
K55 RGB features 3-zone RGB backlighting and comes with 12 preconfi gured lighting modes.
Those modes can be accessed with FN key. Below table outlines available lighting modes and
keyboard shortcuts to access them.
1
MODE FN KEY COMBO ZONE1
1 FN + 1 RED
2 FN + 2 YELLOW
3 FN + 3 BLUE
4 FN + 4 PURPLE
5 FN + 5 ORANGE
6 FN + 6 GREEN
CUSTOM
7 FN + 7
(DEFAULT: OFF)
CYCLE THROUGH THE SAME COLOR ON ALL 3 ZONES:
8 FN + 8
RED / GREEN / BLUE/ YELLOW / CYAN / PURPLE / ORANGE / WHITE
9 FN + 9
RED / GREEN / BLUE/ YELLOW / CYAN / PURPLE / ORANGE / WHITE
10 FN + 0
RED / GREEN / BLUE/ YELLOW / CYAN / PURPLE / ORANGE / WHITE
11 FN + -
RED / GREEN / BLUE/ YELLOW / CYAN / PURPLE / ORANGE / WHITE
12 FN + =
2 3
ZONE2 ZONE3
GREEN BLUE
CYAN PURPLE
CYAN RED
GREEN YELLOW
PURPLE CYAN
BLUE WHITE
CUSTOM CUSTOM
(DEFAULT: OFF) (DEFAULT: OFF)
COLOR PULSE, ALL 3 ZONES:
COLOR SHIFT, ALL 3 ZONES:
COLOR PULSE, ALL 3 ZONES AT A TIME,
MOVES FROM RIGHT TO LEFT:
RAINBOW WAVE
4