Beta 1994CB Manual De Uso E Instrucciones página 6

OPERATION MANUAL AND INSTRUCTIONS ISTRUZIONI PER L'USO
USE
Charging Beta 12V batteries
Connect the battery charger to the mains power socket.
The green LED indicator will blink to indicate that the battery charger has been connected to the
means power supply.
Insert the battery; the red LED indicator will turn on to indicate that the battery is charging.
While charging:
- LED indicator steady red: battery is charging
- LED indicator steady green: battery charging complete
BATTERY CHARGER LED WARNING LIGHTS
- LED indicator blinking red: too high or too low temperature of battery/battery charger.
- LED indicator blinking red and LED indicator blinking green: battery damaged; replace battery.
- All LEDs off: no power supply or battery charger damaged.
Note: Fully charge the battery before first use.
MAINTENANCE
Maintenance and repair jobs must be carried out by trained personnel only. For such jobs, you can
contact Beta Utensili S.p.A.'s repair centre.
DISPOSAL
The crossed-out wheelie bin symbol on the equipment or packaging means that the product should be
collected separately from other types of urban waste at the end of its useful life.
Any user who is going to dispose of this tool shall:
• deliver it to an appropriate collection facility for electronic or electrotechnical equipment;
• return it to the dealer upon purchase of a new, equivalent tool;
• in case of a product for professional use only, contact the manufacturer, who will arrange for the
product to be properly disposed of.
Proper disposal of this product allows the raw materials contained in it to be reused and prevents
damage to the environment or human health.
Illegal disposal of this product is a violation of the provision concerning the disposal of hazardous
waste and will give way to the application of such fines as provided for under current regulations.
6
PARTS LEGEND
1. Battery
2. Charger
3. Battery slot
4. Red LED indicator
5. Green LED indicator
EN I