momoDESIGN FGTR EVO Manual Del Usuario página 15

7 FASTENING SYSTEMS
There are two types of fastening systems: Double "D" and Micrometric fastener.
Below are the instructions for using these three systems.
7.1 DOUBLE "D" RETENTION SYSTEM
To fasten the helmet, pass the strap between the two rings
until the belt presses against your jaw and fasten the press-stud
Check that the helmet is secure (see also the section entitled "Choice of appropriate helmet" in the
"Safety Warning" booklet).
To loosen the helmet, undo the press-stud by pulling the end of the strap and loosen the strap
through the rings, using the red tab, as shown in the diagram
1
2
3
4
, pull the end of the strap
1
, asshown in the diagram.
3
.
4
EN
IT
FR
2
DE
ES
PT
РУ
中文 中文
日本語 日本語
15