momoDESIGN FGTR CLASSIC Manual Del Usuario página 12

12
4.1 REMOVING/FITTING
CHEEK PADS
Prerequisite: in a seated position, place the helmet
upside-down on your knees.
To remove the cheek pads, grasp them at the bottom
and pull inwards to detach them from the velcro
Slide the plastic flap out of its position and remove
the cheek pads
1
To refit the cheek pads, insert the plastic flap into
its slots
3
Make sure that the cheek pads are properly
fastened to the helmet.
2
3
.
2
and attach them to the velcro.
.
1