Publicidad
LED Clean Room Lighting Technology
Given the choices made in this unique lighting concept, there are a few instructions regarding the
maintenance of this luminaire to assure the lighting qualities:
During installation or maintaining the luminaire
please use gloves to avoid spots on the cover.
Dirty spots can be removed:
o
Only dust: with micro fiber cloth
Fingerprints, etc.: with a cleaner for synthetic material with antistatic effect.
o
Remove the protection foil on the cover only short before usage of the lighting installation.
Do not touch electronic components! ESD sensitive.
Do not stare into LED beam.
Luminaire should not be used for illumination
during building activities due to dust contamination
of the optics.
Light source (LED) is non-user replaceable.
The light source contained in this luminaire
shall only be replaced by the manufacturer
Inrush current Ipeak [A]
Inrush current Twidth [ s]
Max. drivers / MCB 16A type B
Maintenance instructions
LED48 LED88
4,5
20,9
192
1000
29
24
3/8
NOTE:
Don't use plastic gloves.
Inrush current
1 mains (A)
1 max
max/2
Tref
1 nom.
Time (us)
Publicidad
