Publicidad
Idiomas disponibles
Idiomas disponibles
A.E.B. srl Via dell'Industria 20
42025 CAVRIAGO (RE) ITALY
Tel. 0522 - 941487 Fax 0522 - 941464
Technical Service Tel. 0522 - 942281
Assembly instructions and guarantee
Right resistive sensor AEB standard
Code 1050
1) Place the sensor on the multivalve and fix it with
the relevant screws.
2) Insert the connector into the sensor and wire as
indicated in the assembly diagram of the
switch/indicator.
It is possible to carry out a small change of the kilometre number
that can be driven as reserve; by rotating the sensor in the seat of
the multivalve in counterclockwise direction, the kilometres that
you must drive as reserve are reduced, while rotating it in
clockwise direction, they increase.
L.P.G.
DEVICE WITH A.E.B.
SENSOR
INDICATOR
GREEN WIRE
DO NOT CONNECT
WHITE WIRE
BLACK WIRE
GROUND
English
IS1050 Rev. 201200 - 1
Publicidad
