Perel CH0001-1 Manual Del Usuario página 7

7.3 Overheating Protection
This heater is equipped with an overheating protection, which will automatically switch off the
heater in case of overheating. If this occurs, please unplug from the mains and allow cooling
for 30 minutes before re-connecting and switching on again.
To avoid overheating, check that the appliance is sufficiently ventilated and that the air intakes
are unobstructed. Please contact your local dealer if the heater keeps switching off.
8. Cleaning and Maintenance
Before cleaning, switch of the appliance, disconnect from the mains and allow to cool
completely.
Never immerse the appliance in water or any other liquid. Protect it from splashes and spraying
liquid.
Occasionally wipe with a damp cloth to keep it looking new. Do not use harsh chemicals,
cleaning solvents or strong detergents.
9. Troubleshooting
The appliance will not switch
on.
The appliance automatically
switches itself off.
Please contact your dealer if problems persist.
Use this device with original accessories only. Velleman Group nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device. For more info concerning
this product and the latest version of this manual, please visit our website www.velleman.eu. The
information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman Group nv. All worldwide rights reserved. No part
of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without
the prior written consent of the copyright holder.
V. 01 – 24/11/2022
Problem
The appliance is not
connected to the mains.
The overheating protection
has been triggered.
The selected temperature has
been reached.
CH0001-1
Possible cause
7
Possible solution
Connect to the mains.
Allow the appliance to cool
down.
Set a higher temperature.
©Velleman Group nv