Publicidad
Idiomas disponibles
Idiomas disponibles
EN
7. transportation and storage
• This machine is an indoor equipment and the attacks of rain and snow should be avoided in the process of transportation and
storage. While loading and unloading, more attention should be paid on the package with words of warning. Storage warehouse
should be kept dry with good air circulation and no corrosive gas or dust. The temperature should be maintained from -25ºC to
55ºC and relative humidity must be lower than 90%.
• If the products are still needed to continue storing after stripping, repacking should be carried out according to original package's
requirement. Remember before storage, don't forget to clean and seal it with plastic bags.
• Users should maintain the cartons and shock blocks in order to be properly packaged in need of long distant transportation. For
the long distant transportation, it should be retrofitted with a wooden case and mark the "up" or "rain" symbols.
8. declaration
Hereby, the company
ES B-63162994
Declares that the machines listed below, which have put into service, comply with the basic requirements corresponding to the
current EU machinery regulations.
Model
CALAF MINI OM120I
CALAF MINI OM160l
CALAF MMA OM200l
EU Guidelines:
2014/35/EU (LVD)
2014/30/EU (EMC)
Applied rules:
EN 60974-10:2014+Al :2015,
EN 55011:2016+Al 1 :2020,
EN 61000-3-11:2000,
EN 61000-3-12: 2011,
EN IEC 60974-1:2018+A1:2019
Certifying company:
ISET S.r.l. Unipersonale - Moglia (MN) - Italy
Any modifications of the machine that have not beforehand been agreed upon and permitted by us invalidate this Declaration of
Conformity.
Reference
8050532
8050533
8050525
Eduard Rodríguez
General manager
23th November 2022
12
Publicidad
