Getting Started; Safety Warning - INTERTECHNO ITLR-3500S Manual De Instrucciones

GB
Operating instructions
The wireless-mini plug socket ITLR-3500S is suitable for wirelessly
controlling lamps and electrical devices with a switching power of up
to 3500 W.
32 storage spaces for various encoding and transmitters.
All teaching intertechno transmitters are suitable for activating
devices.
Wireless motion detectors, wall transmitters, dimmer switches, mini
transmitters and much more are available.
The remote adapter ITLR-3500S can also be switched on and off directly,
without needing a remote control. (Fig. 1)
Scene switching:
In addition, the wireless-mini-plug socket has a storage feature for scene
switching.
Refer to the respective transmitter's instruction manual (e.g. ITF-100,
ITKL-30) for details on scene switching.
Multiple wireless receivers can be changed to the desired switching state
with the touch of a single button.
e.g: Ceiling light OFF/Fan ON/Floor lamp DIMMED

GETTING STARTED

Please also observe the operating instructions for your transmitter.
Encoding (Fig. 2)
Have your chosen transmitter ready.
Insert the remote adapter into the socket.
For the next 6 seconds it is in learn mode.
Press the desired ON button on the transmitter.
The LED will flash and the wireless-mini-plug socket activates 2x as
confirmation that the new code was learned.
By plugging other devices into the plug socket, further transmitters or
other ON buttons can be taught in.
This can be repeated 32x.
After that the first will always be deleted (first in - first out).
This also permits all kinds of group switching operations.
GB
ITLR-3500S
Multiple wireless-receivers can be controlled individually or at the same
time by teaching in the same single code to multiple wireless-receivers.
DONE!
Erasing individual codes:
To delete the encoding, proceed as above (Fig. 2) but then press the OFF
button on the transmitter.
If you want to delete every encoding simultaneously (RESET), one trans-
mitter with the "All off button" has to be used (e.g. ITT-1500).

SAFETY WARNING!

The plug socket must be close to the appliance and must be easily
accessible.
Do not connect in series!
Voltage-free only with the plug disconnected.
Use in dry rooms only.
To view the Declaration of Conformity, please visit
www.intertechno.at/CE
›
Operating instructions
ITLR-3500S