Profile 545142024 Manual De Instrucciones página 20

545142024
NOTE: This mode only works if the unit is already on.
Press the SWING button. The SWING indicator lights up and the blades of the unit blow alternately
from left to right.
COOLER BUTTON
NOTE: This mode only works if the unit is already on.
Press the COOLER button. The unit will now begin to cool the air.
ION BUTTON
NOTE: This mode only works if the unit is already on.
Press the ION button. The ionization function is now on.
FILLING THE WATER TANK
Pull the reservoir from the bottom of the air cooler and fill the water tank with 1/3 water.
CAUTION: Observe the water level indicator while (re)filling!
- The water level must be below "MAX".
- The water level must be higher than "MIN".
USING THE COOLING ELEMENTS
The cooling elements cause the air cooler to blow cold wind.
1. Fill the cooling elements with water
2. Insert the cooling elements into the freezer compartment or a separate freezer.
3. Remove the frozen cooling elements from the freezer and place them in the water reservoir
of the air cooler.
CLEANING
CLEANING THE AIR FILTER
Turn off the unit and unplug the power cord.
Remove the plug (1) and take out the air filter (2). Clean the filter with water and a soft brush. Put
back the filer and close the air cooler with the plug.
CLEANING THE COOLING MAT
NL
4