QFX PBX-1008 Manual Del Usuario página 5

PBX-1008
PBX-1008 FRONT PANEL
4
1 2 3
14 15
13
5
12
7 6
11 10 9 8
1. Previous Track Button: When on USB/SD mode, short press this button to move to the previous
track for USB/SD. Long press this button to reduce the volume for USB/SD.
When on FM mode, short press this button to move to the previous channel. Long press
this button to reduce the volume for FM.
2. Play/Pause Button: The play /pause button will only control the USB flash drive/SD card and FM
inputs.
When on the mode of USB/SD, Press this button to play or pause the track for USB/SD.
When on the mode of FM, press this button to auto scan all channels.
3. Next Track Button: When on USB/SD mode, short press this button to move to the next track for
USB/SD. Long press this button to increase the volume for USB/SD.
When on FM mode, short press this button to move to the next channel. Long press this button to
increase the volume for FM.
4.Input Mode Button: Press this button to toggle between the various inputs (LINE, USB, SD, FM, ).
5. Power Button: Press this button to power the unit on, off or to charge the unit. If the battery needs
to be charged, set the unit to AC and connect the power cable to the rear of the unit. When set to AC,
the unit can also be powered by an external power supply (electrical outlet) even if the battery is
dead. In this case you need to have the unit set to the voltage corresponding to the voltage of the
outlet. To turn the unit off set the power button to OFF. It is recommended to fully charge the battery
prior to using the unit for the first time. It is also recommended to charge the battery at least every
2-3 months to keep the battery operating to it highest capacity.
6. Master Level Control: Turn this knob to adjust the master volume.
7. Treble adjustment: Turn this knob to increase the treble on the LINE/USB/SD/FM inputs
8. Bass adjustment: Turn this knob to increase the bass on the LINE/USB/SD/FM inputs
9. Microphone Echo Knob: Use this knob to adjust the echo for the microphone input(Mic1& Mic2).
10. Microphone Volume Knob: Turn this knob to adjust the microphone volume level of the microphone
input (Mic1& Mic2)
11. Guitar Volume Control: Turn this knob to adjust the volume for the guitar.
12.Microphone Input(1/4"): Connect a microphone to this microphone input terminal.
13. Guitar Input (1/4"): Connect a guitar cable to this input terminal.
14. SD/MMC card slot: Connect your SD/MMC card memory storage (flash drive) device here.
The maximum size of the SD/MMC card can not exceed 8GB. The speaker will only play .mp3 files
from the SD/MMC card input. Do not connect your computer to this input as it will not play files directly
from a computer.
15.USB slot: Connect your USB memory storage (flash drive) device here. The maximum size of the
SD/MMC card can not exceed 8GB. The speaker will only play .mp3 files from the SD/MMC card input.
Do not connect your computer to this input as it will not play files directly from a computer.
-4-