Publicidad
Idiomas disponibles
Idiomas disponibles
Operation (continued)
Blowing
Feature
WARNING:
WARNING:
WARNING:
Always wear safety goggles complying
with ANSi Z87.1 (or in
Canada, CSA Z94.3) before using blower.
Keep bystanders
clear from blowing debris.
Wear a dust mask if blowing creates dust that might be inhaled.
This Wet/Dry Vac has blowing capabilities.
To use the blower feature follow the
instructionslisted.
1. Make sure the collection tank is empty
before using as a blower.
2. Remove hose from the vacuum port.
3. insert the large end of the hose intothe
blower connection in the top of the
motor housing. (Fig. 1)
4. Fit the desired attachment to the hose.
(Fig. 2)
6. Ensure the power switch is turned off
and plug in the power supply. (Fig. 3,)
7. Turn the motor on by flipping the switch
to the "r' position (Fig. 4)
8. The unit will now blow through the
vacuum hose and can be used to clear
obstructions within the hose. (Fig. 5)
Publicidad
