Sencor SHT B302 Manual Del Usuario página 13

Mounting the brackets on the TV set
TV set with fl at rear wall (Fig. 4A)
First, fi nd screws suitable for using to mount TV set (F/G/H/I/J/K): try to screw them manually in the
holes at the back of the TV set. If you feel resistance stop screwing in immediately! Once you fi nd the screw
with the correct threat proceed according to the drawing 4A. Insert matching washer on the screw (L/M)
and then screw it in the bracket B/C and fi nally in the TV set. Check that the brackets are attached vertically
and are parallel.
TV set with curved rear wall (Fig. 4B)
First, fi nd screws suitable for using to mount TV set (F/G/H/I/J/K): try to screw them manually in the
holes at the back of the TV set. If you feel resistance stop screwing in immediately! Once you fi nd the screw
with the correct threat proceed according to the drawing 4B. Insert matching washer on the screw (L/M),
spacer washer (N/O) and then screw the screw in the bracket B/C and fi nally in the TV set. Check that the
brackets are attached vertically and are parallel.
Attaching the TV set to the holder
Warning: Handling some TV sets requires help of another person. The manufacturer is not liable for injury or
damage to property caused by improper handling!
First, hook the brackets attached to the TV set to the top edge of the body of the holder (Fig. 5). Pull the both
ends of the strings on the brackets and hook them to the bottom part of the body of the holder (Fig. 6). Then
let go of the strings.
Congratulation, the installation is done. We wish you a pleasant experience while watching TV mounted on
the wall mount.
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING
Take the used packaging material to the municipal waste disposal.
PRODUCT DISPOSAL AFTER END OF LIFE
Dispose of equipment after the end of life in the designated municipal solid waste place
This product meets all the basic requirements of EU directives that apply to it.
13 – EN
Fast SHO B302.indb 13 29.3.2016 17:14:34