HOW TO OPERATE
1. F irst, find a stable surface near an electrical outlet before starting. Make sure the cord
is away from any water source. It is acceptable to use an extension cord if needed.
2. C heck to make sure the unit is in the OFF position, then plug it into an electrical
outlet.
3. M ake sure the extractor head is in place and fully secured. CAUTION: DO NOT add
sugar or operate the unit without the extractor head in place.
4. T urn on the unit and the extractor head will begin to spin. Allow the unit to heat for
at least 2-3 minutes before adding sugar.
5. A fter allowing the unit to heat for 2-3 minutes, turn the unit OFF.
6. P lace one scoop of flavoured sugar into the extractor head. CAUTION: Do not overfill
or use more than the directed amount of sugar in the extractor head. Over filling may
clog the unit or cause the sugar to fly from the extractor head.
7. S witch the unit on.
8. W hen you see the cotton candy web begin, hold the cone horizontally over the
extractor head to begin collecting the cotton candy. Rotate the cone with your fingers
while you move the cone side to side above the bowl, making sure to collect all the
cotton candy.
CAUTION: Make sure cotton candy webbing does not fall into the heating element as
sugar is flammable. Turn the unit off and allow to cool before removing fallen sugars
from the heating element.
CAUTION: The extractor head rotates at high speeds. Always keep jewelry, long hair,
hands and face a safe distance away from the machine while in use to avoid possible
injuries.
9. R epeat the above steps to make more cotton candy. Make sure the extractor head is
empty before adding another measure of sugar inside.