-"1 ".1 =[e]I _1 [_:_1 II[o] _ I[e] "!':_t.tl
Model No.
919-167461
Max. Developed HP
3
Bore
2.375"
Stroke
1.35"
Voltage-Single
Phase
120V
Minimum Branch Circuit Requirement
15 amps
Fuse Type
Time Delay
Air Tank Capacity - Gallons
4
Approximate
Cut-in Pressure
120
Approximate
Cut-out Pressure
150
SCFM@ 40 psig
7.9
SCFM@ 90 psig
5.5
E.'T:I ; I_ I_'lrll] Im]=1 II I_I =_.']-,I m] = 1 ;ll_lil II[o _]_." ]
This manual contains
information
that iS important
for you to know and understand.
This information
relates to protecting
YOUR SAFETY and PREVENTING
EQUIPMENT
PROBLEMS.
To hetp you rec _
ognize this information_ we use the symbols below. Please read the manual and pay attention to these
sec_ions_
_'_lndicates
an imminent-
ly hazardous situation
which, if not avoided, will result in
death or serious injury.
_lndicates
a potentially
hazardous situation
which, if not avoided, could result in
death or serious injury.
_lndicates
a potentially
hazardous
situation
which,
if not avoided,
_
result in
minor or moderate
injury.
_"_Used
without
the
safety alert symbol
indicates a potentially
hazardous
situ-
ation which,
if not avoided,
may
result in orooertv
damaae.
IhSl_o]-'IL,1+hnlb"Y.'_l_"_'d _[IP,[.._l_o]n/[o _]P,[..+
SAVE THESE INSTRUCTIONS
IMPROPER
OPERATION
OR MAINTENANCE
OF THIS
PRODUCT
COULD
RESULT
IN
SERIOUS
INJURY
AND
PROPERTY
DAMAGE.
READ
AND
UNDERSTAND
ALL
WARN-
INGS
AND
OPERATING
INSTRUCTIONS
BEFORE
USING
THIS
EQUIPMENT.
Some dust created by power sanding,
sawing, grinding,
drilling, and other con*
struation activities
contains chemicals
known (to the State of California) to cause
Cancer, birth defects or other reproductive
harm. Some example of these chemicals
are:
•
lead from lead-based
paints
•
crystalline
silica from bricks and cement
and other masonry products
•
arsenic and chromium
from chemically*treated
lumber
Your risk from these exposures
varies, depending
on how often you do this type of work. To reduce
your exposure
to these chemicals:
work in a well ventilated
area, and work with approved safety
equipment,
always wear MSHA/NIOSH
approved,
propeity
fitting face mask or respirator
when using
such tools.
When using air tools, basic safety precautions
should
always be followed
to reduce the risk of of per_
sonal injury.
3* ENG
D28071