Publicidad
Idiomas disponibles
Idiomas disponibles
F
R
28. Ask for assistance to lift the assembly unit upright and position it near the final location.
29. Pick up one Door (R) and attach the extended Hinge Arms to the Hinge Bases installed on the Left
Lower Side Panel (F). Loosen the bolt on the back of Hinge Base for an easy fit. Align and insert the
"U" slot on Hinge Arm under the bolt head on the back of Hinge Base. Make sure that both door hinges
engage and function properly. Tighten the bolts on the hinge base to lock the hinges in place.
30. Repeat the same procedure to attach the other Door (R) to the Right Lower Side Panel (G).
31. Open and close the doors to make sure they are aligned and shut correctly. If necessary, adjust the
screws for a good fit. Refer to the hinge sticker on door for adjustment.
32. Stick the Rubber Bumpers (12) at the outer corners of the Doors (R) where they are in contact with the
Lower Partition Panels (H and I).
Assembly Instructions
G
26
1
R
x 4
Publicidad
