Hazet SmartTAC SYSTEM 7000 sTAC Serie Instrucciones De Uso página 19

1. General information
NOTE:
1. General information
CAUTION!
2. Operator's liability
For your information
2. Explanation of symbols
READ THE OPERATING INSTRUCTIONS!
NOTE!
WARNING!
CAUTION!
QUALIFIED PERSONNEL ONLY!
For your safety
• The user alone is responsible for the quality of the perfor-
med work and safety of the screw connection. Besides
correct operation, the accuracy of your torque wrench
with built-in angle gauge is crucial in order to guarantee
both quality and safety. The accuracy of the tool can only
be guaranteed by regular inspection or calibration, and, if
necessary, readjustment.
• We recommend - as per the DIN EN ISO 6789:2017 stan-
dard - inspecting and calibrating your torque wrench with
built-in angle gauge after one year at the latest or after 5000
load cycles. The inspection intervals must be shortened
in case of increased quality and safety requirements or
intensive use.
• To check the torque values simply and quickly, the 7900 E
series HAZET torque testers are available to you in three
sizes/torque ranges.
• To adjust and/or calibrate these, please send your HAZET
torque wrench with built-in angle gauge to the HAZET
service centre. You can ship it to us directly or via your
specialist dealer. With a DAkkS calibration at HAZET, we
offer you, as the user, security regarding the reliability of
your measurement results which are used as the basis for
The tool may only be used by qualified
personnel. Handling by non-qualified
people may lead to injuries to persons or
damage to the tool or the workpiece.