Publicidad
Idiomas disponibles
Idiomas disponibles
Step 1: Identify all parts packed in the carton
against the part list. Remove all protective
materials and place on a non-abrasive surface to
avoid scratching.
Step 2: It is recommended that 2 people work
together to assemble the chair. Set the chair frame
(A) on the chair base (B). Both the red arrows on
the frame and base need to be pointing in the
same direction as shown in the diagram.
Step 3: Read this step carefully and examine the
diagram. The four metal plates (D) must be
installed in the proper location. Aligning the holes
in the metal plate with the plate in the chair frame,
guide the bolts (C) through the holes from metal
plate to the chair frame, chair base and most
importantly, through another metal plate which
must be placed directly beneath the rocker plate.
Add a washer (E) and a nut (F) to each bolt. Hand
tighten nuts 3 to 4 revolutions only. Repeat the
same procedure on the other side.
CAUTION: FAILURE TO PLACE METAL PLATES ON THE CORRECT POSITION AS SHOWN IN THE DIAGRAM WILL CAUSE THE BOLT
HEAD AND NUT TO DAMAGE THE STRUCTURE OF THE ROCKER PLATE AND THE CHAIR FRAME.
Step 4: Tighten all nuts and bolts with the hex. wrenches provided. Do not over-tighten. Remove red arrow labels from the chair frame and chair base. Cover all bolts &
nuts with PVC bolt covers (G) provided. on the chair base.
Step 5: Double check your assembly procedure, especially Step 3 if your chair is not rocking properly. If the chair rocks too far forward or is difficult to rock backwards,
you have probably installed the seat frame backwards on the chair base. Please call our CUSTOMER SERVICE CENTER if you need further assistance.
All manuals and user guides at all-guides.com
IF YOU HAVE QUESTIONS OR CONCERNS, PLEASE CALL BOND TOLL FREE # 1-866-711-BOND (2663)
OR TO BETTER EXPEDITE YOUR REQUEST FEEL FREE TO EMAIL US
OR VISIT OUR WEBSITE UNDER CUSTOMER SERVICE SUPPORT
BOND MANUFACTURING CO.
1700 West 4
NOTE: MAKE SURE RED ARROWS ON THE CHAIR FRAME (A)
& CHAIR BASE (B) ARE POINTING IN THE SAME DIRECTION.
customer.service@bondmfg.com
www.bondmfg.com
th
Street, Antioch, CA 94509
Page 2
Publicidad
