Grandstream GWN7831 Guía De Instalación Rápida página 5

Install on a 19" Standard Rack
1. Check the grounding and stability
of the rack.
2. Install the two L-shaped rack-
mounting in the accessories on
both sides of switch, and fix them
with the screws provided (KM
3*6).
3. Place the switch in a proper
position in the rack and support
it by the bracket.
4. Fix the L-shaped rack-mounting
to the guide grooves at both ends
of the rack with screws (prepared
by yourself) to ensure that the
switch is stable and horizontally
installed on the rack.
Note
Air inlet
To avoid high temperatures and keep
the device cool, sufficient space should
be left around the switch for heat dissi-
pation. The air inlet of the switch cannot
face or be close to the air outlet of other
devices.
ACCESS & CONFIGURE
Note: If no DHCP server is available, the GWN7831 default IP address is 192.168.0.254.
Method 1: Login using the Web UI
1. A PC uses a network cable to correctly connect any RJ45 port of the switch.
2. Set the Ethernet (or local connection) IP address of the PC to 192.168.0.x ("x" is any value between 1-253), and
the subnet mask to 255.255.255.0, so that it is in the same network segment with switch IP address. If DHCP is
used, this step could be skipped.
3. Type the switch's management IP address http://<GWN7831_IP> in the browser, and enter username and
password to login. (The default administrator username is "admin" and the default random password can be found
at the sticker on the GWN7831 switch).
Fans
~ 5 ~
Method 2: Login using the Console port
1. Use the console cable to connect the console port of switch and the serial port of PC.
2. Open the terminal emulation program of PC (e.g. SecureCRT), enter the default username and password to login.
(The default administrator username is "admin" and the default random password can be found at the sticker on
the GWN7831 switch).
Method 3: Login Remotely using SSH/Telnet
1. Turn on the Telnet of the switch.
2. Enter "cmd" in PC/Start.
3. Enter telnet <GWN7831_IP> in the cmd window.
4. Enter the default username and password to login. (The default administrator username is "admin" and the default
random password can be found at the sticker on the GWN7831 switch).
Method 4: Configure using GWN.Cloud / GWN Manager
Type https://www.gwn.cloud (https://<gwn_manager_IP> for GWN Manager) in the browser, and enter the
account and password to login the cloud platform. If you don't have an account, please register first or ask the
administrator to assign one for you.
Air outlet
The GNU GPL license terms are incorporated into the device firmware and can be
accessed via the Web user interface of the device at my_device_ip/gpl_license. It can
also be accessed here: https://www.grandstream.com/legal/open-source-software
To obtain a CD with GPL source code information please submit a written request to:
info@grandstream.com
Refer to online documents and FAQ for more detailed information:
https://www.grandstream.com/our-products
~ 6 ~