Publicidad
Idiomas disponibles
Idiomas disponibles
Warranty .........................................
2
Safety Rules ....................................
2-3
Unpacking .......................................
3
Assembly
......................................
3-4
Installation .......................................
5
Operation
......................................
6-9
Maintenance ...................................
9-12
Troubleshooting
..................................
13
Parts Illustrations and Lists .......................
14-17
EspaSol ......................................
18-31
ONE-YEAR
FULL WARRANTY
ON
CRAFTSMAN
PROFESSIONAL
TOOL
If this Craftsman tool fails due to a defect in material or
workmanship within one year from the date of purchase, call
1-800-4-MY-HOME®
TO ARRANGE
FOR FREE REPAIR
(or replacement if repair proves impossible). This warranty
does not include expendable parts, such as lamps, batteries,
bits or blades.
If this tool is ever used for commercial or rental purposes, this
warranty will apply for only 90 days from the date of purchase.
This warranty gives you specific legal rights and you may also
have other rights which vary from state to state.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
WARNING:
For your own safety, read all of the rules and
precautions before operating tool.
WARNING:
Some dust created by power-sanding,
sawing,
grinding, drilling and other construction activities contains
chemicals known to cause cancer, birth defects or other
reproductive harm.
Some examples of these chemicals are:
°
Lead from lead-based paints.
°
Crystalline silica from bricks and cement and other
masonry products.
°
Arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures vary, depending on how often
you do this type of work. To reduce your exposure to these
chemicals: work in a well ventilated area and work with approved
safety equipment. Always wear OSHA/NIOSH
approved,
properly fitting face mask or respirator when using such tools.
CAUTION:
Always follow proper operating procedures as
defined in this manual even if you are familiar with use of
this or similar tools. Remember that being careless for even
a fraction of a second can result in severe personal injury.
BE PREPARED
FOR JOB
*
Wear proper apparel. Do not wear loose clothing, gloves,
neckties, rings, bracelets or other jewelry which may get
caught in moving parts of machine.
*
Wear protective hair covering to contain long hair.
*
Wear safety shoes with non-slip soles.
*
Wear safety glasses complying with United States
ANSI Z87.1. Everyday glasses have only impact
resistant lenses. They are NOT safety glasses.
*
Wear face mask or dust mask if operation is dusty.
*
Be alert and think clearly. Never operate power tools
when tired, intoxicated or when taking medications
that cause drowsiness.
PREPARE
WORK
AREA
FOR JOB
*
Keep work area clean. Cluttered work areas invite
accidents.
*
Do not use power tools in dangerous environments.
*
Do not use power tools in damp or wet locations. Do
not expose power tools to rain.
*
Work area should be properly lighted.
*
Proper electrical receptacle should be available for tool.
Three-prong plug should be plugged directly into properly
grounded, three-prong
receptacle.
*
Extension cords should have a grounding prong and the
three wires of the extension cord should be of the correct
gauge.
*
Keep visitors at a safe distance from work area.
*
Keep children out of workplace. Make workshop childproof.
Use padlocks, master switches or remove switch keys to
prevent any unintentional
use of power tools.
TOOL SHOULD
BE MAINTAINED
*
Always unplug tool prior to inspection.
*
Consult manual for specific maintaining and adjusting
procedures.
*
Keep tool lubricated and clean for safest operation.
*
Remove adjusting tools. Form habit of checking to see that
adjusting tools are removed before switching machine on.
*
Keep all parts in working order. Check to determine that
the guard or other parts will operate properly and perform
their intended function.
*
Check for damaged parts. Check for alignment of moving
parts, binding, breakage, mounting and any other condi-
tion that may affect a tool's operation.
*
A guard or other part that is damaged should be properly
repaired or replaced. Do not perform makeshift repairs.
(Use parts list provided to order repair parts.)
KNOW
HOW TO USE TOOL
*
Use right tool for job. Do not force tool or attachment
to
do a job for which it was not designed.
*
Disconnect tool when changing blades.
*
Avoid accidental start-up. Make sure that the switch is in
the OFF position before plugging in.
*
Do not force tool. It will work most efficiently at the rate
for which it was designed.
*
Keep hands away from moving parts and cutting surfaces.
*
Never leave tool running unattended. Turn the power off
and do not leave tool until it comes to a complete stop.
*
Do not overreach. Keep proper footing and balance.
*
Never stand on tool. Serious injury could occur if tool is
tipped or if blade is unintentionally
contacted.
*
Know your tool. Learn the tool's operation, application
and specific limitations.
*
Use recommended
accessories (refer to page 17). Use of
improper accessories may cause risk of injury to persons.
*
Handle workpiece correctly. Protect hands from possible
injury.
© Sears, Roebuck and Co.
2
Publicidad
