Descargar Imprimir esta página

Audizio ANC110 Manual De Instrucciones página 5

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been
received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from
shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must
be returned, it is important that the product is returned in the original factory box and packaging.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately.
The arising condensation water might damage your device. Leave the device switched off until it has reached room
temperature.
1. USB charge socket
2. 3.5mm input jack
3. Mode
Press and hold to switch noise cancelling function on/off. Noise cancelling function can be 'on', even if 'power' is off.
4. +
Press to skip to next song. Press and hold to increase the volume.
5. –
Press to go to previous track. Press and hold to decrease the volume.
6. Power
Press and hold for 3 seconds to turn the headphones on/off. Press to (re)start or pause play.
When receiving a phone call, press to accept. Press again to end the call.
When receiving a phone call, press and hold for 3 seconds to reject the call.
Double press to redial the last called phone number.
Red/Blue
Green
Red
Press and hold the power button for 3 seconds to turn the headphones on.
The red/blue LED will flash, ready to initiate pairing.
Search for "Audizio ANC110" on your mobile device and initiate pairing. If a password is needed, insert "0000".
When pairing is successful, the blue LED will blink.
The headphones will now emit the audio of the mobile device.
Press and hold the M button to turn the noise canceling function on/off.
Connect the mobile device and headphones by 3.5mm jack – 3.5mm jack cable to enjoy the headphones in wired guise.
Flashes in red and blue under pairing state. When pairing is successful, blue light will blink.
Steadily on when noise canceling function is turned on.
Steadily on when charging. Will be off when fully charged.
5

Publicidad

loading

Este manual también es adecuado para:

100.890