Publicidad
Idiomas disponibles
Idiomas disponibles
4. ASSEMBLY OF THE CANOPY:
Lift the canopy onto the mounting bracket, aligning the loosened screws on the bracket with the slotted holes in
the canopy. Twist the canopy to lock. Reinsert the screws and secure all screws with
screwdriver.
With the mounting bracket conveniently attached to support the weight of the fan, the assembly is ready to hang
the fan. Hold the fan firmly with both hands. Slide bolt through opening in bracket and have hanger ball rest on
mounting bracket. Rotate the ball slot until it lines up with the tab on the bracket.
Tip: Get help from another person to hold the ladder in place and lift the fan up to
you once you are placed on the ladder.
5. BLADES ASSEMBLY:
Time Saver: Blade bolt washers can be placed on each blade bolt prior to installation.
Align the holes in the blades with the screw holes in the motor. Secure and tighten all screws once all blades are
in place. Before attaching the screws permanently, position all the blades equally.
Note: Tighten the blade screws twice.
Dpto. Comercial / Marketing
pedidos@algsa.es
20
MANUAL DE INSTRUCCIONES
INSTRUCTIONS MANUAL
Publicidad
