peerless-AV SS560G Instalación Y Ensamblaje página 6

Attach upright (H) to base (E), as shown in fi g 3.1 using three 3/8-16 x 2.5" socket screws (O) and M10 x .402ID
3
lock washers (Y). Tighten screws using 7/32" allen wrench (P).
NOTE: Be sure cord management holes are in the confi guration shown in fi g 3.2.
fi g. 3.1
Y
O
Loosely attach four 1/4-20 x 12 mm screws (L) and 1/4-20 nuts (M) to shelf support (C).
4
H
E
L
CORD
MANAGEMENT
HOLES
C
6 of 41 ISSUED: 02-25-11 SHEET #: 009-9051-2 09-14-11
fi g. 3.2
M