Professional Series PS-PR288 Manual De Usario página 10

4. Cooking will start 5 seconds after the selection of a pre-programmed function.
• Within 5 seconds after pressing a program function key, you can still select any
other function keys. The cooker will start working 5 seconds after the final selection.
• Cooking load default is "Medium" press "Cooking Load" to select among the "Light",
"Medium" & "Heavy" load options.
• During the operation, you can cancel current cooking program in progress and
return to standby model by pressing the "Keep Warm/Cancel" key.
• Within 5 seconds, a long audible beep will sound to indicate the cooking process
has started. A circular motion LED display indicates the pre-heating is in progress.
• As the pressure increases inside the cooker, the pressure lock pin valve will pop
up.
• Once the pressure inside the cooker reaches the desired level, the circular display
on LED panel will change to the cooking time display. The cooking time counts down
to indicate the remaining time in minutes.
• While the cooking is in progress, you can cancel the current cooking program and
return to standby mode by pressing the "Keep Warm/Cancel" key.
• During operation, the pot may make low click sound. This is a normal operation of
the unit controlling the power cycle.
• When cooking with a small quantity of food, the inner pot may appear to be stuck on
the lid by pressure when the lid is opened. In this case, shake the lid slightly, and then
remove the lid after the inner pot falls back into its position.
• When cooking is complete, the corresponding function indicator goes out and the
cooker will make an audible beep. The cooker starts the keep warm function
automatically.
• The "Keep Warm" indicator is on to show the cooker is in the keeping warm function.
It is not recommended to leave the cooked rice in "Keep Warm" state for too long as it
may affect the cooking result.
All manuals and user guides at all-guides.com